SB 200 (serv.man3) - JBL Audio EMC - CB Certificate (repair manual). Page 66

Read JBL SB 200 (serv.man3) EMC - CB Certificate online

Page 66 of 70 
Report No.: 350-120155AX 
 
  
 
 
 
 
 
IEC 60065 
Clause 
Requirement + Test 
Result - Remark 
Verdict
 
TRF No. IEC60065K 
National Differences – Japan,  J60065 (H23) 
15.1.1 
Replace the first and second paragraph by the 
following. 
Plugs and appliance couplers for the connection of 
the apparatus to the MAINS and socket-outlets 
and interconnection couplers for providing MAINS 
power to other apparatus shall comply with the 
relevant JIS standards for plugs, socket-outlets, 
appliance couplers or interconnection couplers. If 
there is no appropriate JIS standard, they shall 
comply with the relevant IEC standards. 
Appliance connectors, interconnection outlets and 
interconnection plug-connectors compiled with 
Appendix 3 of the Ministerial Ordinance on 
stipulating technical requirements for the Electrical 
Appliance and Material are accepted. In that case, 
if due to the shape the contact parts are 
connectable to those specified in standard sheets 
of IEC 60320-1, they shall comply with dimensions 
and ratings specified in the relevant standard 
sheets of IEC 60320-1. 
Examples of relevant specifications and standards:
- Plugs / Socket-outlets: Appendix 4 of Article 1 of 
the Ministerial Ordinance on stipulating technical 
requirements for the Electrical Appliance. Article 
2 (corresponding to IEC 60884) of the 
Ordinance. 
-  Appliance couplers: Appendix 4 of Article 1 of 
the Ministerial Ordinance on stipulating technical 
requirements for the Electrical Appliance. Article 
2 (corresponding to IEC 60320-1) of the 
Ordinance. 
-  Appliance inlets: IEC 60320-1 
- Interconnection outlets: Appendix 4 of Article 1 of 
the Ministerial Ordinance on stipulating technical 
requirements for the Electrical Appliance. IEC 
60320-2-2.  
- Interconnection couplers: Appendix 4 of Article 1 
of the Ministerial Ordinance on stipulating 
technical requirements for the Electrical 
Appliance.  
Delete NOTE 1 and NOTE 2. 
See appended table CL.14.
Pass 
15.1.1 
Replace the paragraph after NOTE 2 by the 
following. 
MAINS socket-outlets and interconnection 
couplers mounted on CLASS 0I and CLASS II 
apparatus shall not permit connection of CLASS I 
apparatus. 
 N/A 
Page of 78
Display

Click on the first or last page to see other SB 200 (serv.man3) service manuals if exist.