Read JBL ON TIME MICRO (serv.man2) EMC - CB Certificate online
- Page 15 of 39 -
Report No. NTEK-2011NT1009318S
EN 60065
Clause
Requirement + Test
Result - Remark
Verdict
NTEK Testing Technology Co., Ltd.
Component meets category FV 1 of IEC 60 707
N
14.4.1
High voltage transformers and multipliers tested as
part of the submission
part of the submission
N
14.4.2
High voltage assemblies and other parts tested as
part of the submission
part of the submission
N
14.5 Protective
devices
N
Protective devices used within their ratings
N
External clearance and creepage distances
appropriate for the voltage across the device when
opened
appropriate for the voltage across the device when
opened
N
14.5.1.1
a) Thermal cut-outs separately approved
N
b) Thermal cut-outs tested as part of the
submission
submission
N
14.5.1.2
a) Thermal links separately approved
N
b) Thermal links tested as part of the submission
N
14.5.1.3
Thermal devices re-settable by soldering
N
14.5.2.1
Fuse-links in the mains circuit according to
IEC 60 127
IEC 60 127
N
14.5.2.2
Correct marking of fuse-links adjacent to holder ... :
N
14.5.2.3
Not possible to connect fuses in parallel ............... :
N
14.5.2.4
Not possible to touch hazardous live parts when
replacing fuse-links without the use of a tool ......... :
replacing fuse-links without the use of a tool ......... :
N
14.5.3
PTC-S thermistors comply with IEC 60 730-1
N
PTC-S devices (15 W) category FV 1 or better
N
14.5.4 Circuit
protectors
have adequate breaking capacity
and their position is correctly marked
N
14.6 Switches
N
14.6.1 a)
Separate testing to IEC 61058 including:
10 000 operation, Nirmal pollution suitability,
Resistance to heat and fire level 3 and V-0
compliance with annex G, G.1.1
Resistance to heat and fire level 3 and V-0
compliance with annex G, G.1.1
N
14.6.1 b)
Tested in the apparatus:
N
Switch controlling > 0.2A with open contact voltage
> 35 V (peak) / 24 V dc complying with 14.6.3,
14.6.4 and V-0 in annex G, G.1.1
> 35 V (peak) / 24 V dc complying with 14.6.3,
14.6.4 and V-0 in annex G, G.1.1
N
Click on the first or last page to see other ON TIME MICRO (serv.man2) service manuals if exist.