Read JBL JEMBE WIRELESS (serv.man2) EMC - CB Certificate online
Report No. SF201200115 Page 12 of 32
EN 60065
Clause
Requirement – Test
Result - Remark
Verdict
14.3.4.1
Class II transformers have adequate separation
between hazardous live parts and accessible
parts (double or reinforced insulation)
between hazardous live parts and accessible
parts (double or reinforced insulation)
N
Coil formers and partition walls > 0,4 mm
N
14.3.4.2
Class I transformers, with basic insulation and
protective screening only if all 7 conditions of
14.3.4.2 are met
protective screening only if all 7 conditions of
14.3.4.2 are met
N
14.3.4.3
Separating transformers with at least basic
insulation
insulation
N
14.3.5.1
Class II transformers have adequate insulation
between hazardous live parts and accessible
parts (double or reinforced insulation)
between hazardous live parts and accessible
parts (double or reinforced insulation)
N
Coil formers and partition walls > 0,4 mm
N
14.3.5.2
Class I transformers have adequate insulation
between hazardous live parts and accessible
conductive parts or those conductive parts or
protective screens connected to a protective
earth terminal
between hazardous live parts and accessible
conductive parts or those conductive parts or
protective screens connected to a protective
earth terminal
N
Winding wires connected to protective earth
have adequate current-carrying capacity
have adequate current-carrying capacity
N
14.4
High voltage components
No high voltage components
N
High-voltage components and assemblies:
U > 4 kV (peak) separately approved
U > 4 kV (peak) separately approved
(see appended table)
N
Component meets category V-1 of IEC 60707
N
14.4.1
High voltage transformers and multipliers tested
as part of the submission
as part of the submission
N
14.4.2
High voltage assemblies and other parts tested
as part of the submission
as part of the submission
N
14.5
Protective devices
N
Protective devices used within their ratings
N
External clearances and creepage distances
meet requirement of clause 13 for the voltage
across the device when opened
meet requirement of clause 13 for the voltage
across the device when opened
No insulation requirement.
N
14.5.1.1
a) Thermal cut-outs separately approved
No such component
N
b) Thermal cut-outs tested as part of the
submission
submission
N
14.5.1.2
a) Thermal links separately approved
N
b) Thermal links tested as part of the submission
N
14.5.1.3
Thermal devices re-settable by soldering
N
14.5.2.1
Fuse-links in the mains circuit according to IEC
60127
60127
Not connect to the mains.
see appended table 14
N
Click on the first or last page to see other JEMBE WIRELESS (serv.man2) service manuals if exist.