BALBOA SUB10 (serv.man2) - JBL Audio EMC - CB Certificate (repair manual). Page 14

Read JBL BALBOA SUB10 (serv.man2) EMC - CB Certificate online

 
Page 10 of 44 
Report Ref No.: 614376 
IEC 60065 
Clause 
Requirement + Test 
Result - Remark 
Verdict 
 
 
TRF No.: IEC60065E 
 
TRF Originator: ASTABEAB 
12.6.1 
Telescoping or rod antennas securement 
 
N/A 
 
 
13 
CLEARANCE AND CREEPAGE DISTANCES 
 
13.1 
Clearances in accordance with 13.3 
 
 
Creepage distances in accordance with 13.4 
 
13.2 
Determination of operating voltage 
 
13.3 Clearances 
 
 
13.3.2 
Circuits conductively connected to the mains 
comply with table 8 and, where applicable, 
table 9 
 P 
13.3.3 
Circuits not conductively connected to the 
mains comply with table 10 
Circuits not conductively connected to 
the mains cannot cause any shock 
hazard 
N/A 
13.3.4 
Measurement of transient voltages 
 
N/A 
13.4 Creepage 
distances 
 
 
 
Creepage distances greater than table 11 
minima 
 P 
13.5 Printed 
boards 
 
 
13.5.1 
Clearances and creepage distances between 
conductors on printed circuit boards, one of 
which may be conductively connected to the 
mains, as in fig. 10 
 N/A 
13.5.2 
Type B coated printed circuit boards complying 
with IEC 60664-3 (basic insulation only) 
 N/A 
13.6 
Conductive parts along uncemented joints 
clearances and creepage distances comply 
with 13.3 and 13.4 
 N/A 
 
Conductive parts along reliably cemented joints 
comply with 8.8 
 N/A 
13.7 
Enclosed, enveloped or hermetically sealed 
parts: not conductively connected to the mains: 
clearances and creepage distances as in 
table 12 
 N/A 
13.8 Parts 
filled with insulating compound, meeting 
the requirements of 8.8 
 N/A 
 
 
14 COMPONENTS 
 
14.1 Resistors 
 
 
a) Resistors between hazardous live parts and 
accessible metal parts 
 N/A 
Page of 56
Display

Click on the first or last page to see other BALBOA SUB10 (serv.man2) service manuals if exist.