Read JBL BALBOA SUB10 (serv.man2) EMC - CB Certificate online
Page 5 of 44
Report Ref No.: 614376
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
TRF No.: IEC60065E
TRF Originator: ASTABEAB
6 HAZARDOUS
RADIATION
6.1
Ionizing radiation < 36 pA/kg (0,5 mR/h)
N/A
6.2
Laser radiation, emission limits to IEC 60825-1 ..
N/A
Emission limits under fault conditions .............. :
N/A
7
HEATING UNDER NORMAL OPERATING CONDITIONS
7.1
Temperature rises not exceeding specified
values, any single protective device defeated
except those of Cl. 7.1 a) and b)
values, any single protective device defeated
except those of Cl. 7.1 a) and b)
P
7.1.1
Temperature rise of accessible parts
P
7.1.2
Temperature rise of parts providing electrical
insulation
insulation
P
7.1.3
Temperature rise of parts acting as a support or
as a mechanical barrier
as a mechanical barrier
P
7.1.4
Temperature rise of windings
P
7.1.5
Parts not subject to a limit under 7.1.1 to 7.1.4
P
7.2
Softening temperature of insulating material
supporting parts conductively connected to the
mains carrying a current > 0,2 A at least 150
supporting parts conductively connected to the
mains carrying a current > 0,2 A at least 150
o
C
N/A
8
CONSTRUCTIONAL REQUIREMENTS WITH REGARD TO THE PROTECTION
AGAINST ELECTRIC SHOCK
AGAINST ELECTRIC SHOCK
8.1
Conductive parts covered by lacquer, paper,
untreated textile oxide films and beads etc.
considered to be bare
untreated textile oxide films and beads etc.
considered to be bare
P
8.2
No shock hazard when changing voltage
setting device, fuse-links or handling drawers
etc.
setting device, fuse-links or handling drawers
etc.
N/A
8.3
Insulation of hazardous live parts not provided
by hygroscopic material
by hygroscopic material
Not used
P
8.4
No risk of electric shock following the removal
of a cover which can be removed by hand
of a cover which can be removed by hand
P
8.5
Class I equipment
Basic insulation between hazardous live parts
and earthed accessible parts
and earthed accessible parts
N/A
Capacitors bridging basic insulation complying
with 14.2.1 a)
with 14.2.1 a)
N/A
8.6
Class II equipment and Class II constructions within Class I equipment
Click on the first or last page to see other BALBOA SUB10 (serv.man2) service manuals if exist.