Read Harman Kardon HKTS 11 (serv.man13) EMC - CB Certificate online
Page 13 of 48
Report Ref No.: 615320
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
13
CLEARANCE AND CREEPAGE DISTANCES
13.1
Clearances in accordance with 13.3
Prim – sec. >10mm
Prim – acc. metal parts : 6mm
Prim – acc. metal parts : 6mm
P
Creepage distances in accordance with 13.4
P
13.2
Determination of operating voltage
See TABLE 13
P
13.3
Clearances
13.3.2
Circuits conductively connected to the mains
comply with table 8 and, where applicable,
table 9
comply with table 8 and, where applicable,
table 9
P
13.3.3
Circuits not conductively connected to the
mains comply with table 10
mains comply with table 10
Circuits not conductively connected to
the mains cannot cause any shock
hazard.
the mains cannot cause any shock
hazard.
N/A
13.3.4
Measurement of transient voltages
N/A
13.4
Creepage distances
Creepage distances greater than table 11
minima
minima
P
13.5
Printed boards
13.5.1
Clearances and creepage distances between
conductors on printed circuit boards, one of
which may be conductively connected to the
mains, as in fig. 10
conductors on printed circuit boards, one of
which may be conductively connected to the
mains, as in fig. 10
N/A
13.5.2
Type B coated printed circuit boards complying
with IEC 60664-3 (basic insulation only)
with IEC 60664-3 (basic insulation only)
N/A
13.6
Conductive parts along uncemented joints
clearances and creepage distances comply
with 13.3 and 13.4
clearances and creepage distances comply
with 13.3 and 13.4
N/A
Conductive parts along reliably cemented joints
comply with 8.8
comply with 8.8
N/A
13.7
Enclosed, enveloped or hermetically sealed
parts: not conductively connected to the mains:
clearances and creepage distances as in
table 12
parts: not conductively connected to the mains:
clearances and creepage distances as in
table 12
N/A
13.8 Parts
filled with insulating compound, meeting
the requirements of 8.8
N/A
Click on the first or last page to see other HKTS 11 (serv.man13) service manuals if exist.