Read Harman Kardon AVR 360 EMC - CB Certificate online
- Page 10 of 44 -
Report
No.
129950
IEC 60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No. IEC60065_I
8.7
This clause is void ………………………..:
—
8.8
Basic or supplementary insulation > 0,4 mm (mm) :
N/A
Reinforced insulation > 0,4 mm (mm) ……:
Bobbin in main and sub
transformer. (ref. 14.3)
transformer. (ref. 14.3)
P
Thin sheet insulation (excluding non-separable thin
sheet insulation. See 8.22) ………:
sheet insulation. See 8.22) ………:
No thin sheet insulation.
N/A
Basic or supplementary insulation, at least two
layers, each meeting 10.3 ….....:
layers, each meeting 10.3 ….....:
N/A
Basic or supplementary insulation, three layers any
two of which meet 10.3 ………………......:
two of which meet 10.3 ………………......:
N/A
Reinforced insulation, two layers each of which meet
10.3 ……...:
10.3 ……...:
N/A
Reinforced insulation, three layers any two which
meet 10.3 ……………………….:
meet 10.3 ……………………….:
N/A
8.9
Adequate insulation between internal hazardous live
conductors and accessible parts .:
conductors and accessible parts .:
Double insulated
P
Adequate insulation between internal hazardous live
parts and conductors connected to accessible parts:
parts and conductors connected to accessible parts:
Single insulation, but safely
anchored.
anchored.
P
8.10
Double insulation between conductors connected to
the mains and accessible parts. …………………...:
the mains and accessible parts. …………………...:
Double insulated according to
8.9. and 10.3
8.9. and 10.3
P
Double insulation between internal hazardous live
parts and conductors connected to accessible parts:
parts and conductors connected to accessible parts:
Single insulation, but safely
anchored.
anchored.
N/A
8.11
Detaching of wires …………………………………..:
P
No undue reduction of creepages or clearance
distances if wires become detached ……………:
distances if wires become detached ……………:
Primary wires are connected
with multi-contact-housing
with multi-contact-housing
P
Vibration test carried out …………:
See 12.12
N/A
8.12
This clause is void ………………..:
—
8.13
Adequate fastening of windows, lenses, lamp covers
etc. (pull test 20 N for 10 s) …………………...:
etc. (pull test 20 N for 10 s) …………………...:
Adequately fastened.
P
8.14
Adequate fastening of covers (push/pull test 50 N
for 10 s) ……………………..:
for 10 s) ……………………..:
Covers adequately
fastened with screws.
fastened with screws.
P
8.15
No risk of damage to the insulation of internal wiring
due to hot parts or sharp edges …………:
due to hot parts or sharp edges …………:
Wires safely anchored away
from parts with high
temperature.
from parts with high
temperature.
P
8.16
Only special supply equipment can be used :
Not supplied by a special
supply apparatus.
supply apparatus.
N/A
Click on the first or last page to see other AVR 360 service manuals if exist.