Read Harman Kardon ABH-4 (serv.man10) EMC - CB Certificate online
page 11 of 42
Report No.SPCLVD31229
TRF No.: I950___D
TRF originator: FIMKO
2.6
Provisions for earthing and bonding
Pass
2.6.1
Protective earthing
See below
Pass
2.6.2
Functional earthing
Secondary functional earthing
is connected to protectively
earthed conductive part which
part is separated from
primary by basic insulation.
is connected to protectively
earthed conductive part which
part is separated from
primary by basic insulation.
Pass
2.6.3
Protective earthing and protective bonding
conductors
conductors
See below.
Pass
2.6.3.1
Size of protective earthing conductors
Power supply cord suitable for
application and subject to
country's national code and
regulations to be provided by
the manufacturer.
application and subject to
country's national code and
regulations to be provided by
the manufacturer.
Pass
Rated current (A), cross-sectional area (mm
2
),
AWG:
2.6.3.2
Size of protective bonding conductors
No power cord provided.
N/A
Rated current (A), cross-sectional area (mm
2
),
AWG:
2.6.3.3
Rated current (A), type and nominal thread
diameter (mm):
diameter (mm):
Pass
Resistance (
Ω
) of earthing conductors and their
terminations, test current (A):
See enclosed test record.
Pass
2.6.3.4
Colour of insulation:
Evaluated as part of the
power supply.
power supply.
Protective earthing conductor
is green with yellow stripe.
is green with yellow stripe.
Pass
2.6.4
Terminals
Appliance inlet used.
Pass
2.6.4.1
Protective earthing and bonding terminals
The earth pin of the approved
appliance inlet is considered
as protective earthing
terminal.
appliance inlet is considered
as protective earthing
terminal.
Pass
Rated current (A), type and nominal thread
diameter (mm)
diameter (mm)
The protective bonding
conductor is connected to the
approved appliance.
approved appliance.
2.6.4.2
Separation of the protective earthing conductor
from protective bonding conductors
from protective bonding conductors
Appliance inlet used.
Pass
2.6.5
Integrity of protective earthing
See below.
Pass
2.6.5.1
Interconnection of equipment
No interconnection of
hazardous voltage.
hazardous voltage.
N/A
2.6.5.2
Components in protective earthing conductors
and protective bonding conductors
and protective bonding conductors
No switches or fuses in
earthing conductors.
earthing conductors.
Pass
2.6.5.3
Disconnection of protective earth
It is not possible to disconnect
protective earth without
disconnecting mains; an
appliance inlet is used as
disconnect device.
protective earth without
disconnecting mains; an
appliance inlet is used as
disconnect device.
Pass
Click on the first or last page to see other ABH-4 (serv.man10) service manuals if exist.