Read Harman Kardon ABH-4 (serv.man10) EMC - CB Certificate online
Report No.SPCLVD31229
TRF No.: I950___D
TRF originator: FIMKO
SAFETY INSTRUCTIONS
Model: SSB-0124 or PS6
1.
Please read these safety instructions carefully.
2.
Please keep this User‘s Manual for later reference.
3.
Please disconnect this equipment from AC outlet before cleaning. Don‘t use liquid or sprayed
detergent for cleaning. Use moisture sheet or clothe for cleaning.
4.
For plugable equipment, the socket-outlet shall be installed near the equipment and shall be easily
accessible.
5.
Please keep this equipment from humidity.
6.
Lay this equipment on a reliable surface when install. A drop or fall could cause injury.
7.
Make sure the voltage of the power source when connect the equipment to the power outlet.
8.
Place the power cord such a way that people cannot step on it. Do not place anything over the power
cord.
9.
All cautions and warnings on the equipment should be noted.
10.
If the equipment is not use for long time, disconnect the equipment from mains to avoid being
damaged by transient over-voltage.
11.
If one of the following situations arises, get the equipment checked by service personnel:
a.
The Power cord or plug is damaged.
b.
Liquid has penetrated into the equipment.
c.
The equipment has been exposed to moisture.
d.
The equipment has not work well or you cannot get it work according to user‘s manual.
e.
The equipment has dropped and damaged.
f.
If the equipment has obvious sign of breakage
12.
Do not leave this equipment in an environment unconditioned, storage temperature above 25
°
C, it
may damage the equipment.
13.
The power supply shall be installed according to specification. The current of load and output power
of loads shall be not over the specified as following value.
14.
For connection to the mains use an approved power cord. For a rated current up to 6A and an
appliance weight of more than 3kg a power cord not less than H05VV-F,
3G, 0.75mm² shall be used
15.
The sound pressure level at the operators position according to IEC 60704-1 1982 is equal or less
than 70dB(A).
