KV-SW213M81 - Sony TV Service Manual (repair manual). Page 10

– 9 –

Earth Assy, Coating

Standing Purse Lock

Non-3D models

3D models

Standing Purse Lock 

DGC Conn 

Lead Assy,

Speaker (RED+BLK)

AC Power Cord

Lead Assy, Earth 

Make sure the round
side of spring tension
is installed to Earth
Assy, Coating

Dress wires away from beznet's front terminal --> Prevent

wires from being sandwiched when docking chassis.

Make sure Lead Assy, Earth is

kept away from group of

heatsinks

Dress AC Power Cord and

Lead Assy, Speaker

(WHT+BLK) with Pin, wire

A016

Conn Assy, 3P is above
AC Power Cord and bunch
of wires & towards LEFT
of Standing Purse Lock.

Dress AC Power Cord and

Lead Assy, Speaker

(WHT+BLK) with Pin, wire

A016

Dress DGC Conn together with AC Power Cord, Lead Assy, Earth & Lead

Assy, Speaker (RED+BLK) which are dressed during Chassis Assy as shown

in Figure 2.4(i)

Dress DGC Conn together with AC Power Cord, Lead Assy, Earth & Lead

Assy, Speaker (RED+BLK) which are dressed during Chassis Assy as

shown in Figure 2.4(ii)

CAUTION:
1. Do not overpull the wires during dressing
  --> avoid disconnection of wires.
2. Make sure wires are kept away from
  sharp edges, heatsinks & other
  high-temperature parts.
3. Prevent wires from being sandwiched with
  beznet's front terminal when docking chassis.
4. Dress speaker wire & AC cord above capacitors
  near it --> prevent from touching high-temp parts.