Read Sony KV-SW213M81 Service Manual online
– 8 –
KV-SW213M81
RM-GA002
2-3. Wiredressing on A board
2-4. AC Power Cord, Lead Assy, Speaker, Connector Assy, 3P and Lead Assy, Earth dressing at A board
FBT Flange
(i) Non 3D models
(ii) 3D models
(iii) For non 3D and 3D
RY600
AC Cord
540 ± 5
(
Standing Purse
Lock
Pull towards right
Pull wires towards right to prevent
slacking, then dress wires above
capacitors' height as shown --> prevent
from touching high temperature parts
Lead Assy, Focus
FBT Flange
Make sure
rubber cap is
pushed
down to make
sure it covers
the FBT flange
completely
Keep wires above of
RY600
--> prevent wires
from being
sandwiched with
front jack & pushed
against relay
RY600
--> prevent wires
from being
sandwiched with
front jack & pushed
against relay
Dress AC Power Cord with
Standing Purse Lock, followed
by Lead Assy, Earth and Lead
by Lead Assy, Earth and Lead
Assy, Speaker (RED+BLK).
Keep wires above of RY600
--> prevent wires from being
sandwiched with front jack &
pushed against relay
--> prevent wires from being
sandwiched with front jack &
pushed against relay
Dress AC Power Cord
with Standing Purse
Lock, followed by Lead
Assy, Earth and Lead
Assy, Speaker
(RED+BLK).
Dress AC Power Cord and Lead
Assy, Speaker (WHT+BLK) with
Pin, Wire A016
Keep Conn. Assy, 3P
above bunch of wires
Dress AC Power Cord and Lead
Assy, Speaker (WHT+BLK) with
Pin, Wire A016
CAUTION:
Make sure wires are
kept away from sharp
edges,
heatsinks & other high.
temperature parts
Make sure wires are
kept away from sharp
edges,
heatsinks & other high.
temperature parts
HV cable
RY600
Lead Assy,
Speaker (RED+BLK)
Lead Assy, Earth
AC Power Cord
CAUTION:
Make sure wires are kept away from sharp edges,
heatsinks & other high-temperature parts
Make sure wires are kept away from sharp edges,
heatsinks & other high-temperature parts
Click on the first or last page to see other KV-SW213M81 service manuals if exist.