KV-HV212M50 - Sony TV Service Manual (repair manual). Page 14

– 13 –

Dress Conn Assy, 7P, UL Wire (1-923-000-81), Lead Assy, Earth, 

Dress Conn Assy, 7P, UL Wire (1-923-000-81), Lead Assy, Earth, 

Conn Assy, 3P(1-900-703-83), Rotational Coil Conn with purse lock, Ø9 as shown.

and Rotational Coil Conn with purse lock, Ø5 as shown.

Note : Keep Lead Assy, Earth away from heat sinks. 

Note : Keep Lead Assy, Earth away from heat sinks. 

Purse Lock Ø9

Lead Assy,

Earth

Conn Assy, 7P

UL Wire (1-923-000-81)

Conn Assy,

3P

Rotational Coil

Conn

Rotation Coil

DY

90

Purse Lock Ø5

Keep Lead Assy, Earth away
from heat sinks

Conn Assy, 7P

Rotational
Coil Conn

Lead Assy, Earth

A:  Conn Assy, 7P
B:  Lead Assy, Earth
C:  UL Wire (1-923-000-81)
D: Rotational Coil Conn
E: Conn Assy, 3P (woofer)

A      B    C   D  E

Purse Lock Ø9

A:  Conn Assy, 7P
B:  Lead Assy, Earth
C:  UL Wire (1-923-000-81)
D: Rotational Coil Conn

A    B     C    D 

Purse Lock Ø5

1) Dress HV cap assy with HV Holder as shown

     Note: Make sure the specified position is being followed.

2) Dress HV holder at DGC with purse lock, Ø9 as shown

3) Using Yellow line (CRT Carbon line) as a reference to dress purse lock, Ø9.

Ensure HV Holder is beside
DGC to keep further distance 
from HV Cable

distance > 1mm/kV

distance < 1mm/kV

180 ± 5 mm

HV Cable Holder

Place purse lock Ø9 after the exit of DGC Conn from DGC

DGC

Purse Lock Ø9

Black tape

DGC Conn outlet

Gate (2 positions)

of HV holder

Dress HV Cable at inner ring

45º

Min. distance = 1mm/kV

Min. distance = 1mm/kV

Min. distance =

0.5mm/kV

CRT Carbon

Area

TVSR requirement:
1. Spacing between HV cable and other conductive part’s surface is 1mm/kV or more.
2. Spacing between HV cable's and enclosure with ventilation or the edge where
  terminal bracket and rear cover meet: 10 mm or more.
3. Spacing between edge of anode cap and conductive parts is 0.5mm/kV or more

Keep wires away

from heat sinks

UL Wire (1-923-000-81)

Wire from

Rotation Coil