Read Sony KV-HV212M50 Service Manual online
– 11 –
KV-HV212M50/M53
RM-GA002
2-10. Lead Assy, Speaker & DGC Connector Dressing
2-11. Top Switch Wire Dressing
Spring extension
Lead Assy, Speaker (RED+BLK) is
sandwiched between DGC & CRT surface.
Keep wires away from sharp edge
of spring extension --> to prevent
scratching on wires.
Ensure wires are kept
away from heatsink.
Keep Lead Assy, Speaker
(RED+BLK) close to CRT
surface
Right Speaker
2) Insert Lead Assy, Speaker (WHT+BLK) followed by
AC Power Cord in CRT support's hook.
Make sure Lead Assy, Speaker (WHT+BLK) is secured
behind AC Power Cord & does not touch heatsinks.
AC Power Cord in CRT support's hook.
Make sure Lead Assy, Speaker (WHT+BLK) is secured
behind AC Power Cord & does not touch heatsinks.
1) Pull wires towards right
--> to prevent slacking of wires
--> to prevent slacking of wires
Standing purse lock
Black tape
Ensure DGC Connector is kept
behind of black tape.
behind of black tape.
Ensure DGC Connector is
kept behind of DGC
kept behind of DGC
DGC Connector in front of DGC before dress with
standing purse lock.
Top switch wire under
DGC & right of black tape
Top switch wire under
DGC & left of black tape
Black tape
Ensure Top Switch wire is
dressed around AC Power
Cord --> keep away from
heatsink
dressed around AC Power
Cord --> keep away from
heatsink
Left Speaker
Click on the first or last page to see other KV-HV212M50 service manuals if exist.