Read Sony KV-HV212M50 Service Manual online
– 10 –
KV-HV212M50/M53
RM-GA002
2-9. DGC Connector, Lead Assy, Speaker and Lead Assy, Earth Dressing
2-7. Earth Coating Assy Installation at CRT
2-8. Earth Assy, Coating Dressing
Earth Assy,
Coating
Coating
Make sure the round side of
spring tension is installed to
Earth Assy, Coating
spring tension is installed to
Earth Assy, Coating
Make sure loop made is of a small
radius (closely dressed around DGC)
DGC
1. Earth Assy, Coating is in
front of DGC before looping it
once around DGC.
2. Once loop is made, Earth
Assy, Coating wire is
connected to C board.
From braided wire of Earth
Assy, Coating at CRT
3D models
Non-3D models
Dress DGC Conn together with AC Power Cord, Lead Assy,
Earth & Lead Assy, Speaker (RED+BLK) which are dressed
during Chassis Assy as shown in 2-6.
Earth & Lead Assy, Speaker (RED+BLK) which are dressed
during Chassis Assy as shown in 2-6.
Standing Purse Lock
Dress AC Power Cord and
Lead Assy, Speaker
(WHT+BLK) with Pin, wire
A016
Standing Purse Lock
Dress DGC Conn together with AC Power Cord, Lead Assy, Earth & Lead Assy,
Speaker (RED+BLK) which are dressed during Chassis Assy as shown in 2-6.
Speaker (RED+BLK) which are dressed during Chassis Assy as shown in 2-6.
Conn Assy, 3P is above AC Power
Cord and bunch of wires & towards
LEFT of Standing Purse Lock.
Cord and bunch of wires & towards
LEFT of Standing Purse Lock.
Dress AC Power Cord and
Lead Assy, Speaker
(WHT+BLK) with Pin, wire
A016
DGC Conn
Lead Assy,
Speaker(RED+BLK)
AC Power Cord
Lead Assy, Earth
Standing Purse
Lock
Make sure Lead Assy,
Earth is kept away from
group of heatsinks
Dress wires away from beznet's front terminal --> Prevent
wires from being sandwiched when docking chassis.
Make sure Earth Assy, Coating
wire is close to CRT surface
before making a loop around DGC
Click on the first or last page to see other KV-HV212M50 service manuals if exist.