Read Sony KV-HP213M83 (serv.man2) Service Manual online
– 9 –
KV-HP213M83
RM-GA002
2-4. INSERT DUMMY CONNECTOR TO CN600 (A PWB)
2-5. INSERT EARTH COATING ASSY TO CN705 (C PWB)
2-6. INSTALL C PWB TO CRT NECK
1. Insert Dummy connector to CN600 (A PWB)
Dummy Connector
OK
NG-Lifted
1. Make a loop with ECA around the DGC and pull toward
C brd when connecting as in Figure 1 & 2.
2. Insert Earth Coating Assy connector to CN705 (CPWB)
as in Figure 3.
3. Pull & Push Earth Coating assy, Conn. (1x) to ensure its
lock on C pwb.
CN705 (C PWB)
Coating Earth Assy
DGC Coil
OK
NG-LIFTED
1. Install C PWB to CRT neck
2. Push the C PWB towards CRT.
CRT socket printed
Space Between C PWB
& Conn. Assy 7P
CAUTION:
Make sure Dummy Connector is fully inserted to ensure degaussing is
functioning during adjustment process in progress.
Make sure Dummy Connector is fully inserted to ensure degaussing is
functioning during adjustment process in progress.
CAUTION:
1. Make sure Earth Assy, Coating, Conn. is completely locked.
2. Make sure Earth Assy, Coating is not too tight on C PWB.
1. Make sure Earth Assy, Coating, Conn. is completely locked.
2. Make sure Earth Assy, Coating is not too tight on C PWB.
CAUTION:
Make sure the CRT socket is properly installed into the CRT neck.
Pull up Conn. Assy 7P to give space for G2 jig.
Make sure the CRT socket is properly installed into the CRT neck.
Pull up Conn. Assy 7P to give space for G2 jig.
Click on the first or last page to see other KV-HP213M83 (serv.man2) service manuals if exist.