Read Sony KV-HP213M83 (serv.man2) Service Manual online
– 6 –
KV-HP213M83
RM-GA002
1-8.
PICTURE TUBE REMOVAL
Note:
• Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom right
and left.
1) Remove the Rear Cover.
2) Unplug all interconnecting leads from the Deflection Yoke, Neck Assy, Degaussing Coils and CRT grounding strap. Remove
2) Unplug all interconnecting leads from the Deflection Yoke, Neck Assy, Degaussing Coils and CRT grounding strap. Remove
Chassis Assy.
3) Place the TV set with the CRT face down on a cushion (jig).
1-7.
H3 BOARD REMOVAL
2 H3 Board
1 Three screws
(+BVTP 3 x 12 TYPE2 IT-3)
(+BVTP 3 x 12 TYPE2 IT-3)
8
Degaussing Coil
9
Spring Tension
Removal (x2)
5
C Board Removal
q;
Earth Coating Assy
4
Anode Cap Removal
qa
Screw, Tapping St Crown Washer (x4)
7
Loosen the Deflection Yoke
fixing screw and remove
6
Loosen the Neck Assembly
fixing screw and remove
Neck Assy
Neck Assy
Click on the first or last page to see other KV-HP213M83 (serv.man2) service manuals if exist.