Read Sony KV-HP213M83 (serv.man2) Service Manual online
– 12 –
KV-HP213M83
RM-GA002
2-13. DRESS CONN. ASSY,7P WITH CABLE TIE
2-14. INSTALL J3 PWB TO J PWB BRACKET
2-15. INSTALL STANDING PURSE LOCK(PA) INTO A PWB
1. Dress Conn. Assy, 7P with Cable tie at hole "A" (1x)
Connector
Assy, 7P
Assy, 7P
C PWB
1. Install J3 PWB to J PWB bracket's slots (2x) as shown .
2. Insert Lead Assy Speaker & Conn. Assy, 3P to J3 PWB as shown.
J3
J PWB Bracket
Terminal Jack
Lead Assy, Speaker
Conn. Assy, 3P
J3
1. Install Standing Purse Lock (PA) into A PWB as shown.
Standing Purse Lock(PA)
A PWB
C660
OK
NG
Heatsink (IC751)
CAUTION:
Make sure cable tie dressed completely.
Make sure cable tie dressed completely.
Make sure wires do not touch heat sink (IC751) & avoid from
sharp edges & high temperature parts.
sharp edges & high temperature parts.
Make sure cable tie end face toward DY and also do not touch
Rear cover and any parts.
Rear cover and any parts.
CAUTION:
1. Make sure Standing Purse Lock is parellal with C660.
1. Make sure Standing Purse Lock is parellal with C660.
2. Make sure Standing Purse Lock completely installed.
* until "click" sound heard.
* until "click" sound heard.
Hole A
(Cable Tie)
Click on the first or last page to see other KV-HP213M83 (serv.man2) service manuals if exist.