Read Sony KV-AW21M80A Service Manual online
– 9 –
KV-AW21M80A/AW21M91A
RM-GA002
2-7. INSERT EARTH COATING ASSY TO CN705 (C/CV PWB)
2-8. KEEP AWAY LEAD ASSY, G2 & FOCUS
2-9. DRESS AC CORD WIRE TO CRT
SUPPORT HOOK (LEFT)
2-10. DRESS AC CORD WIRE TO RAIL GUIDE
COVER BOTTOM (LEFT)
CN705 (C/CV PWB)
Figure1
Figure 2
Figure 3
OK
1. Make s loop with ECA around the DGC and pull toward C/CV board when
connecting as in Figure 1 & 2.
connecting as in Figure 1 & 2.
2. Insert Earth Coating Assy connector to CN705
(C/CV PWB) as in Figure 3.
(C/CV PWB) as in Figure 3.
3. Pull & Push Earth Coating assy, Conn.
(1x) to ensure its locked on C/CV pwb.
(1x) to ensure its locked on C/CV pwb.
DGC Coil (bottom)
Coating Earth Assy
Coating Earth Assy
Lead Assy, Focus
Lead Assy, G2
Keep Lead Assy, G2
away from HV Cable
(at least 1mm/kV)
away from HV Cable
(at least 1mm/kV)
Keep Lead Assy, G2
away from Heatsink
away from Heatsink
Keep away Lead Assy, G2 from HV cable & Heatsink as shown
CRT Support (Left)
CN 602 (A PWB)
CRT Support
(Left)
DGC
AC Cord Wire
Dress AC cord wire to CRT support's hook (left) (1) as shown.
CAUTION:
Make sure Speaker wire inner side of CRT support.
Cover, Bottom
AC Cord Wire
Cover Bottom
CN 602 (A PWB)
Cover Bottom's boss(rail guide)
Cover Bottom
Rail Guide
Dress AC cord wire to Rail guide Cover bottom's boss
(1x) as shown.
(1x) as shown.
CAUTION:
Make sure AC cord is completely locked.
CAUTION:
1. Make sure Earth Assy, Coating, Conn. is completely locked.
2. Make sure Earth Assy, Coating is not too tight on C/CV PWB.
1. Make sure Earth Assy, Coating, Conn. is completely locked.
2. Make sure Earth Assy, Coating is not too tight on C/CV PWB.
TVSR Requirement :
Keep HV cables away from conductive parts 1mm/kV or more
Keep HV cables away from conductive parts 1mm/kV or more
Click on the first or last page to see other KV-AW21M80A service manuals if exist.