Read Sony KV-AW21M80A Service Manual online
– 13 –
KV-AW21M80A/AW21M91A
RM-GA002
2-25. DRESS CONNECTOR ASSY 7P WITH PIN
LEAD (A705)
2-26. DRESS CONN ASSY 7P WITH PIN LEAD
TO CV PWB
2-27. DRESS CONN. ASSY 4P WITH PIN LEAD
2-28. INSERT LEAD ASSY, SPEAKER TO CN200
(A PWB)
2-29. INSERT CONN. AC CORD POWER TO
CN602 ( A PWB )
2-30. DRESS AC CORD CONN. & SPEAKER
WIRE (L) WITH PIN LEAD (A016)
Conn. Assy 7P
Pin Lead
A 705 (1x)
Dress Conn. Assy,7P with pin lead A705 (1x) as shown.
Pin Lead A 002
Conn. Assy 7P
CN004 (A PWB)
CN701
(CV PWB)
Connector Assy, 7P
Pin Lead
A 002 (1x)
Dress Conn. Assy 7p with Pin Lead A002 (1x) as shown.
CV PWB
Pin Lead A 006
Conn. Assy 4P
CN003 (A PWB)
CN711
(CV PWB)
CONNECTOR ASSY 4P
Dress Conn. Assy 4P with Pin Lead (A006) (1x) as shown.
PIN LEAD A006
(CV PWB)
CN200 (A PWB)
Lead Assy Speaker
1. Insert Lead Assy, Speaker
to CN200 (A PWB)
2. Insert Lead Assy, Speaker
left (Wht + Blk) & right (Red+Blk)
into Standing Purse Lock (PA)
to CN200 (A PWB)
2. Insert Lead Assy, Speaker
left (Wht + Blk) & right (Red+Blk)
into Standing Purse Lock (PA)
Lead Assy Speaker(left)
Lead Assy
Speaker(right)
Purse Lock PA
1
2
3
Lead Assy(W001)
Conn AC Cord
CN602 (A PWB)
1) Insert conn Ac Cord Power to CN602 ( A PWB )
2) Push & pull connector Ac Cord Power ( 1x ).
2) Push & pull connector Ac Cord Power ( 1x ).
Speaker Wire (L)
Capacitor (C217)
Terminal Bracket
Speaker Wire
Left(CN200)
Ac Cord Conn.
CN602 (A PWB)
Dress AC Cord connector & Speaker wire (L) with pin lead (A016)
(1x) as shown.
(1x) as shown.
Pin Lead
A 016
CAUTION:
Make sure Connector Assy is fully inserted.
Kept away Connector Assy from Heat sink IC751.
Make sure Connector Assy is fully inserted.
Kept away Connector Assy from Heat sink IC751.
CAUTION:
Make sure wire does not
touch HS ( IC751)
Make sure wire does not
touch HS ( IC751)
CAUTION:
Make sure wire does not
touch HS ( IC751)
Make sure wire does not
touch HS ( IC751)
CAUTION:
Make sure Connector Assy
is fully inserted.
Make sure Lead Assy,
Speaker left passed at back
Standing Purse Lock (PA)
Make sure Connector Assy
is fully inserted.
Make sure Lead Assy,
Speaker left passed at back
Standing Purse Lock (PA)
Conn. AC Cord under
Lead Assy (W001)
CAUTION:
Make sure connector Ac Cord Power is fully inserted by push &
pull (1x) after inserting.
Make sure Conn. AC Cord Power under the Lead Assy
(W001)(H/M) as shown.
Make sure connector Ac Cord Power is fully inserted by push &
pull (1x) after inserting.
Make sure Conn. AC Cord Power under the Lead Assy
(W001)(H/M) as shown.
CAUTION:
Make sure all wire must above capacitor (C217) as shown.
Make sure all wire must above capacitor (C217) as shown.
Click on the first or last page to see other KV-AW21M80A service manuals if exist.