Read Sony KV-AW21M80A Service Manual online
– 8 –
KV-AW21M80A/AW21M91A
RM-GA002
2-3. INSERT DGC CONNECTOR TO
CN601 ( A PWB )
2-5. INSERT CONNECTOR DY TO CNDY 1 (A PWB)
2-4. DRESS AC CORD, SPEAKER WIRE(R&L),
DGC WIRE & LEAD ASSY EARTH WITH
PURSE LOCK PA
2-6. DRESS SPEAKER WIRE UNDER DGC
DGC
Wire Speaker
(right/left)
CN200
(A PWB)
(A PWB)
Spring extension
Speaker wire (R)
(Red+Blk)
Yellow line on the CRT
Speaker wire (L)
(Wht+Blk)
Yellow line on the CRT
Wire (Left ) (White+Black)
Wire (Right ) (Red+Black)
1. Insert Speaker wire (R ) ( Red+Black) under
DGC bottom as shown.
DGC bottom as shown.
1. Insert Speaker wire (L) ( Wht+Blk) under DGC bottom as shown.
DGC Coil
DGC Connector
Insert DGC connector to CN601.
Front Terminal Beznet
DGC Wire
Lead Assy Earth
1
2
CN601( A PWB)
Purse Lock PA
Speaker Wire CN200
(A PWB)
(A PWB)
SpeakerTerminal
(Red+Blk)
(Red+Blk)
DGC Wire
Lead Assy Earth
AC Cord Powe
CN602 ( A PWB)
Speaker Wire CN200
(A PWB)
(A PWB)
SpeakerTerminal
(Wht+Blk)
(Wht+Blk)
Speaker wire
(White+Black)
Purse Lock PA
AC Cord Power
1. Dress AC Cord, Speaker wire (R ) ( Red + Black), Speaker
wire (L) (White + Black), DGC wire & Lead Assy Earth with
purse lock PA (1x) as shown.
wire (L) (White + Black), DGC wire & Lead Assy Earth with
purse lock PA (1x) as shown.
CNDY1 (A PWB)
1
2
DY Connector
Conn.Assy 5p
Earth Assy,
Coating
CNDY 1 (A PWB)
1. Insert Conn. DY to CNDY 1 (A PWB)
2. Hold the connector with proper way.
2. Hold the connector with proper way.
OK
Pin Lock
CAUTION:
Make sure the connector is fully inserted by push & pull (1x).
Make sure DGC Connector and Lead Assy, Speaker (RED+BLK)
is located at the left and below Lead Assy, Earth
Make sure the connector is fully inserted by push & pull (1x).
Make sure DGC Connector and Lead Assy, Speaker (RED+BLK)
is located at the left and below Lead Assy, Earth
CAUTION:
1. DY Connector must go under Earth Coating Assy ~ Refer No.1
2. DY Connector must go above Conn. Assy, 5P ~ Refer No.2
3. Do not hold pin lock on the connector body.
4. Make sure DY connector (wire) is fully inserted by push & pull (1x)
1. DY Connector must go under Earth Coating Assy ~ Refer No.1
2. DY Connector must go above Conn. Assy, 5P ~ Refer No.2
3. Do not hold pin lock on the connector body.
4. Make sure DY connector (wire) is fully inserted by push & pull (1x)
Speaker wire
(Red+Black)
CAUTION:
Dress wires away from beznets front terminal --> prevent wires
from being sandwiched when docking chassis.
Dress wires away from beznets front terminal --> prevent wires
from being sandwiched when docking chassis.
CAUTION:
1. Make sure speaker wire
does not touch CRT Support
to avoid 'RATTLE SOUND'
2. Make sure Speaker wire
does not touch Spring
extension's hook to avoid
from torn.
3. Make sure Speaker wire
dressed parellal with "Yellow
line" on the CRT.
1. Make sure speaker wire
does not touch CRT Support
to avoid 'RATTLE SOUND'
2. Make sure Speaker wire
does not touch Spring
extension's hook to avoid
from torn.
3. Make sure Speaker wire
dressed parellal with "Yellow
line" on the CRT.
Click on the first or last page to see other KV-AW21M80A service manuals if exist.