Read Sony KV-AW21M80A Service Manual online
– 7 –
KV-AW21M80A/AW21M91A
RM-GA002
SECTION 2
WIRE DRESSING
CAUTION :
1. Do not overpull the wires during dressing
1. Do not overpull the wires during dressing
--> avoid disconnection of wires.
2. Make sure wires are kept away from
sharp edges, heatsinks & other
high-temperature parts.
high-temperature parts.
2-1. Dress DGC with Cable Tie
2-2. INSTALL COATING EARTH ASSY,HOOK SPRING, EXTENSION TO EARTH COATING ASSY
DGC BOTTOM
DGC UPPER
Coating Earth Assy
DGC Bottom
DGC
CABLE TIE
CRT MFB
DGC Coil
upper
Dress DGC bottom (left & right) with cable tie (2x) to
CRT MFB as shown
CRT MFB as shown
CAUTION:
Make sure cable tie end must be
inside CRT MFB as shown.
inside CRT MFB as shown.
Dress DGC upper (left & right) with
cable tie (2x) to CRT MFB as shown
cable tie (2x) to CRT MFB as shown
Anode Button
1
CRT MFB Bottom (L)
2
CRT MFB
Earth Coating Assy
Anode Button
1 ) Hook Earth coating assy to top CRT MFB hook right (1x).
2 ) Hook Earth coating to bottom CRT MFB hook left (1x).
2 ) Hook Earth coating to bottom CRT MFB hook left (1x).
CAUTION:
Make sure the connector
wire of Earth Coating Assy
at the bottom side as
shown
wire of Earth Coating Assy
at the bottom side as
shown
1 ) Hook Extension spring to the CRT MFB bottom right (1x).
Cable Tie
Cable Tie
Conn.Wire
Earth Coating
CAUTION:
Make sure Extension spring
hook is facing away from the
CRT MFB.
Make sure Extension spring
hook is facing away from the
CRT MFB.
Click on the first or last page to see other KV-AW21M80A service manuals if exist.