KV-AW21M80A - Sony TV Service Manual (repair manual). Page 13

– 12 –

CN701 (C PWB)

Cable Tie Hole "A"

Conn. Assy 7P

CN004 (A PWB)

Dress Conn. Assy 7p with
Cable Tie at hole"A" (1x) as
shown.

Connector Assy, 7P

Hole "A" (Cable Tie) (1X)

CRT Support

Heat Sink (Audio)

AC CORD

CN001(H PWB)

CN005 (A PWB)

1.Pass the CN001(H PWB) wire (Cover Bottom) (1x) as shown. 
(refer No. 1)
2. CN001 wire must at inner side of CRT Support (left) as shown.
(refer No. 2)
3. Dress CN001(H PWB) to CN005 ( A PWB) as shown.

Rear Cover

Purse Lock (S)(DIA. 8)

AC Cord wire

Dress AC Cord wire to Purse Lock(S) (DIA.8) as shown.

CN703 (C PWB)

Insert Conn. Assy, 
5Pfrom CN801 
(A PWB) to CN703 
(C PWB)

G2 Lead

Focus Lead

Connector Assy, 5P (CN703)

CN701 (C PWB)

Conn Assy 7P (CN701)

Insert Conn. Assy, 7P from CN004 (A PWB) to CN701 ( C PWB)

CONN. ASSY 7P ( CN701 )

CV PWB

Dress Conn. Assy 7P from CN004 (A PWB) to CN701 (CV PWB)

CAUTION:
Make sure wire does not touch HS ( IC751)
Make sure cable tie end facing toward DY (to avoid rattle 
sound if it towards the rear cover)

CAUTION:
Make sure connector wire is fully inserted.
Make sure CN001 connector does not touch Heat Sink (Audio)

CAUTION:
Dress only two(2) from AC Cord wires to Purse Lock (S)(DIA.8)
Make sure AC Cord wire fully hooked to Purse Lock.

CAUTION:
Make sure G2 lead assy is 
fully inserted.
Make sure Conn. Assy, 5 P 
on top of Lead Assy, G2 &
Lead Assy, Focus as shown.

CAUTION:
Make sure Connector Assy is fully inserted.
Kept away Connector Assy from Heat sink IC751.

CAUTION:
Make sure Connector Assy is fully inserted.