Read Sony DPP-SV88 Service Manual online
2-3
DPP-SV88 V1
9.
Remove the sixteen solders, then remove the lower
DK shield case from the DK-42 board.
DK shield case from the DK-42 board.
10. Attach a DK-42 board in the reverse order of steps 1 to
9.
DK-42 board
Lower DK shield case
Solders
Solders
Solders
Solders
2-2-4. MD-42 Board
1.
Remove the upper cabinet assembly. (Refer to Section
1-2-1.)
1-2-1.)
2.
Remove the front panel assembly. (Refer to Section 1-
2-2.)
2-2.)
3.
Remove the CD-RW drive assembly. (Refer to Section
2-1.)
2-1.)
4.
Remove the DK-42 board. (Refer to Section 2-2-3.)
5.
Disconnect the seven harnesses, then disconnect the
two flexible flat cables.
6.
Remove one screw (BVTP 2.6
x 8), then disconnect
one harness.
7.
Raise the ferrite holder and remove the three screws
(BVTT 2.6
x 5), then remove the MD-42 board.
8.
Attach a MD-42 board in the reverse order of steps 1
to 7.
Ferrite holde
Flexible flat cable
Flexible flat cable
Harness
Harness
Harnesses
Harnesses
MD-42 board
BVTT
2.6
2.6
x
5
BVTP
2.6
2.6
x
8
Click on the first or last page to see other DPP-SV88 service manuals if exist.