Read Sony DPP-EX5 Service Manual online
2-8
DPP-EX5 V1
BVTT
2.6
x
5
E chassis
assembly
assembly
BVTP
2.6
2.6
x
8
BVTP
2.6
2.6
x
8
Paper feed
frame assembly
frame assembly
Paper feed
frame holder
frame holder
SW earth
plate (2)
plate (2)
PS 3
x
10
MD-44 board
CN903
DC fan
Harness
2-5. Paper Feed Frame Assembly
1.
Remove the panel (L). (Refer to Section 1-2-1.)
2.
Remove the panel (R). (Refer to Section 1-2-2.)
3.
Remove the panel (TOP) assembly (Refer to Section 1-2-3.)
4.
Remove the SW-44 board. (Refer to Section 2-1-1.)
5.
Remove the front door. (Refer to Section 1-2-4.)
6.
Remove the cabinet (L). (Refer to Section 1-2-5.)
7.
Remove the ferrite holder. (Refer to Section 2-8.)
8.
Remove the DK-44 board. (Refer to Section 2-1-2.)
9.
Remove the paper eject guide assembly. (Refer to
Section 2-3.)
Section 2-3.)
10. Remove the E chassis assembly. (Refer to Section 2-4.)
11. Remove the two screws (BVTP 2.6
11. Remove the two screws (BVTP 2.6
x8) and two screws
(BVTT 2.6
x5), then remove the SW earth plate (2)
and paper feed frame assembly in the direction
indicated by the arrow.
12. Attach the paper feed frame assembly in the reverse
order of steps 1 to 11.
m
. When attaching the paper feed frame assembly, be sure
. When attaching the paper feed frame assembly, be sure
to attach it while repressing the R pendulum lever
assembly in the direction indicated by the arrow.
. When attaching the paper feed frame assembly, be sure to
securely insert the four hooks of the E chassis assembly
into the four holes of the paper feed frame assembly.
into the four holes of the paper feed frame assembly.
2-6. DC Fan
1.
Remove the panel (L). (Refer to Section 1-2-1.)
2.
Remove the panel (R). (Refer to Section 1-2-2.)
3.
Remove the panel (TOP) assembly (Refer to Section
1-2-3.)
1-2-3.)
4.
Remove the SW-44 board. (Refer to Section 2-1-1.)
5.
Remove the front door. (Refer to Section 1-2-4.)
6.
Remove the cabinet (L). (Refer to Section 1-2-5.)
7.
Remove the two screws and disconnect one harness
from the connector (CN903) on the MD-44 board, then
remove the DC fan.
remove the DC fan.
8.
Attach the DC fan in the reverse order of steps 1 to 7.
Click on the first or last page to see other DPP-EX5 service manuals if exist.