Read Sony DPP-EX5 Service Manual online
2-5
DPP-EX5 V1
Paper guide
assembly
assembly
Paper feed
frame assembly
frame assembly
Hook
Hook
Hook
Hook
A
A
B
RM-44 board
Paper feed
frame assembly
frame assembly
Hook
Harness
CN981
Hook
RM-44 board
2-1-7. RM-44 Board
1.
Remove the panel (L). (Refer to Section 1-2-1.)
2.
Remove the panel (R). (Refer to Section 1-2-2.)
3.
Remove the panel (TOP) assembly (Refer to Section
1-2-3.)
1-2-3.)
4.
Remove the SW-44 board. (Refer to Section 2-1-1.)
5.
Remove the front door. (Refer to Section 1-2-4.)
6.
Remove the cabinet (L). (Refer to Section 1-2-5.)
7.
Remove the ferrite holder. (Refer to Section 2-8.)
8.
Remove the DK-44 board. (Refer to Section 2-1-2.)
9.
Remove the paper eject guide assembly. (Refer to
Section 2-3.)
10. Remove the E chassis assembly. (Refer to Section 2-
4.)
11. Remove the MD-44 board. (Refer to Section 2-1-4.)
12. Remove the paper feed frame assembly. (Refer to
Section 2-5.)
13. Remove the four hooks, then remove the paper guide
assembly from the paper feed frame assembly.
14. Remove the two hooks of the paper feed frame
assembly in the direction indicated by the arrow A,
then remove the RM-44 board in the direction
indicated by the arrow B.
indicated by the arrow B.
15. Disconnect one harness from the connector (CN981)
on the RM-44 board.
16. Install the RM-44 board in the reverse order of steps 1
to 15.
Click on the first or last page to see other DPP-EX5 service manuals if exist.