Read Sony DPP-EX5 Service Manual online
2-3
DPP-EX5 V1
Harness
JD-44 board
P2
x
3
CN961
2-1-5. JD-44 Board
1.
Remove the panel (L). (Refer to Section 1-2-1.)
2.
Remove the panel (R). (Refer to Section 1-2-2.)
3.
Remove the panel (TOP) assembly (Refer to Section
1-2-3.)
1-2-3.)
4.
Remove the SW-44 board. (Refer to Section 2-1-1.)
5.
Remove the front door. (Refer to Section 1-2-4.)
6.
Remove the cabinet (L). (Refer to Section 1-2-5.)
7.
Remove the ferrite holder. (Refer to Section 2-8.)
8.
Remove the MD-44 board. (Refer to Section 2-1-4.)
9.
Remove one screw, then remove the JD-44 board.
10. Disconnect one harness from the connector (CN961)
on the JD-44 board.
11. Install the JD-44 board in the reverse order of steps 1
to 10.
Click on the first or last page to see other DPP-EX5 service manuals if exist.