Read Sony DPP-EX5 Service Manual online
2-4
DPP-EX5 V1
PE-44 board
Paper feed
frame assembly
frame assembly
Paper feed
frame assembly
frame assembly
Hook
Harness
CN971
A
B
E chassis
assembly
assembly
2-1-6. PE-44 Board
1.
Remove the panel (L). (Refer to Section 1-2-1.)
2.
Remove the panel (R). (Refer to Section 1-2-2.)
3.
Remove the panel (TOP) assembly (Refer to Section
1-2-3.)
1-2-3.)
4.
Remove the SW-44 board. (Refer to Section 2-1-1.)
5.
Remove the front door. (Refer to Section 1-2-4.)
6.
Remove the cabinet (L). (Refer to Section 1-2-5.)
7.
Remove the ferrite holder. (Refer to Section 2-8.)
8.
Remove the DK-44 board. (Refer to Section 2-1-2.)
9.
Remove the paper eject guide assembly. (Refer to
Section 2-3.)
10. Remove the E chassis assembly. (Refer to Section 2-
4.)
11. While pushing the hook of the paper feed frame
assembly in the direction indicated by the arrow A,
remove the PE-44 board in the direction indicated by
remove the PE-44 board in the direction indicated by
the arrow B.
12. Disconnect one harness from the connector (CN971)
on the PE-44 board.
13. Install the PE-44 board in the reverse order of steps 1
to 12.
Click on the first or last page to see other DPP-EX5 service manuals if exist.