Read Sony DPP-EX5 Service Manual online
2-10
DPP-EX5 V1
BVTT
2.6
2.6
x
5
CN905
Stepping motor
Harness
MD-44 board
2-9. Stepping Motor
1.
Remove the panel (L). (Refer to Section 1-2-1.)
2.
Remove the panel (R). (Refer to Section 1-2-2.)
3.
Remove the panel (TOP) assembly (Refer to Section
1-2-3.)
1-2-3.)
4.
Remove the SW-44 board. (Refer to Section 2-1-1.)
5.
Remove the front door. (Refer to Section 1-2-4.)
6.
Remove the cabinet (L). (Refer to Section 1-2-5.)
7.
Remove the ferrite holder. (Refer to Section 2-8.)
8.
Remove the DK-44 board. (Refer to Section 2-1-2.)
9.
Remove the paper eject guide assembly. (Refer to
Section 2-3.)
10. Remove the E chassis assembly. (Refer to Section 2-
4.)
11. Remove the two screws and disconnect one harness
from the connector (CN905) on the MD-44 board, then
remove the stepping motor.
remove the stepping motor.
12. Attach the stepping motor in the reverse order of steps
1 to 11.
BVTT
2.6
2.6
x
5
BVTT
2.6
2.6
x
5
BVTT
2.6
2.6
x
5
E transmission
gear assembly
gear assembly
Reinforcing plate (L)
2-10. E Capstan Roller
n
When replacing the E capstan roller, platen roller or pinch
When replacing the E capstan roller, platen roller or pinch
roller, be extremely careful not to touch the roller with bear
hands or dirty gloves.
hands or dirty gloves.
1.
Remove the panel (L). (Refer to Section 1-2-1.)
2.
Remove the panel (R). (Refer to Section 1-2-2.)
3.
Remove the panel (TOP) assembly (Refer to Section
1-2-3.)
4.
Remove the SW-44 board. (Refer to Section 2-1-1.)
5.
Remove the front door. (Refer to Section 1-2-4.)
6.
Remove the cabinet (L). (Refer to Section 1-2-5.)
7.
Remove the ferrite holder. (Refer to Section 2-8.)
8.
Remove the DK-44 board. (Refer to Section 2-1-2.)
9.
Remove the paper eject guide assembly. (Refer to
Section 2-3.)
Section 2-3.)
10. Remove the E chassis assembly. (Refer to Section 2-
4.)
11. Remove the MD-44 board. (Refer to Section 2-1-4.)
12. Remove the paper feed frame assembly. (Refer to
12. Remove the paper feed frame assembly. (Refer to
Section 2-5.)
13. Remove the stepping motor. (Refer to Section 2-9.)
14. Remove the two screws, then remove the reinforcing
plate (L).
15. Remove the four screws, then remove the E
transmission gear assembly.
Click on the first or last page to see other DPP-EX5 service manuals if exist.