Read Sony HDR-CX530E / HDR-CX535 / HDR-CX610E / HDR-PJ530E / HDR-PJ540 / HDR-PJ540E / HDR-PJ610E (serv.man2) Service Manual online
1-7
HDR-CX530E/CX535/CX610E/PJ530E/PJ540/PJ540E/PJ610E_L2
– ENGLISH –
(13) Remove the two screws and remove the Sheet Metal D while de-
taching the two bosses.
Screws
Sheet Metal D
Bosses
TO
P
FRONT
(14) Remove the two bosses and the claw to detach the Front Orna-
ment.
Front Ornament
Boss
Boss
Claw
TO
P
FRONT
Installation
(1) While installing the two bosses and the claw, install the Front Or-
nament.
TO
P
FRO
NT
Front Ornament
Boss
Boss
Claw
(2) While installing the two bosses, install the Sheet Metal D and
tighten two screws.
Tightening torque = 0.12 ± 0.02N · m (1.2 ± 0.2kg f · cm)
TOP
FRONT
Screws
Sheet Metal D
Bosses
1
2
(3) While installing the two bosses, stick the Adhesive Part of the
FP-2126 Flexible Board.
If the adhesive force is lowered, cut the Adhesive Sheet as shown
in the figure in the frame and then stick it.
in the figure in the frame and then stick it.
TOP
FRONT
Adhesive part
Adhesive part
FP-2126 Flexible Board
FP-2126 Flexible Board
Sheet Metal A
Bosses
Shape and sticking position of Adhesive Sheet
(4) Connect the connector and install the Sheet Metal A and the FP-
2126 Flexible Board while attaching the six bosses.
Tighten three screws in the order shown in the figure below.
Screw (A)
Screw (A)
Tightening torque = 0.18 ± 0.02N · m (1.8 ± 0.2kg f · cm)
Screw (B)
Screw (B)
Tightening torque = 0.12 ± 0.02N · m (1.2 ± 0.2kg f · cm)
TOP
FRONT
TOP
Screw
(B)
(B)
Screw
(A)
(A)
Screw
(A)
(A)
Connector
Lens
Flexible Board
Flexible Board
Lens Flexible Board
FP-2126
Flexible Board
Flexible Board
FP-2126 Flexible Board
Sheet Metal A
Bosses
Bosses
1
2
3
Click on the first or last page to see other HDR-CX530E / HDR-CX535 / HDR-CX610E / HDR-PJ530E / HDR-PJ540 / HDR-PJ540E / HDR-PJ610E (serv.man2) service manuals if exist.