Read Sony SLT-A99 / SLT-A99V Service Manual online
SLT-A99/A99V_L2
1-2
4) Download the Destination Data file of the relevant model and unzip the file.
5) Execute “DESTINATION DATA WRITE” in the Adjust tab of the Adjust manual.
Click the [START] button.
6) Click the [File Update] button in the window.
7) A file selection screen opens. Select the Destination Data file to be added and click the [Open] button.
8) When the file has been successfully added, the following window opens.
9) Check the Destination Ver. window and confirm that the version has been updated.
Destination Ver. window
– ENGLISH –
1-3. PRECAUTION ON REPLACING THE AM-031 BOARD
Destination Data
When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
USB Serial No.
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Imager DRA Data
Extract the imager data from the set before the AM board replacement using “Imager DRA Data Reference” in the DATA tab of the Adjust manual.
After the AM board has been replaced, write the data extracted from the set before the AM board replacement in the set using “Imager DRA Data Input”
in the ADJUST tab of the Adjust manual.
After the AM board has been replaced, write the data extracted from the set before the AM board replacement in the set using “Imager DRA Data Input”
in the ADJUST tab of the Adjust manual.
Click on the first or last page to see other SLT-A99 / SLT-A99V service manuals if exist.