Read Sony SLT-A99 / SLT-A99V Service Manual online
SLT-A99/A99V_L2
1-4
– ENGLISH –
(1) Remove the spring.
Spring
(2) Remove the solder on the enamel wires at two places.
Solder
(3) Remove the Spring Torsion (CAP) from the Plate CAP.
Plate Cap
Spring Torsion (CAP)
(4) Pull out the Plate CAP.
Plate Cap
(5) Remove the Spring Torsion (CAP) from the Plate CAP.
Spring
Torsion (CAP)
Torsion (CAP)
Plate Cap
(6) Pull out the Plate CAP.
Plate Cap
(7) Remove the Slider A Assy while releasing the hooks.
Slider A Assy
Hook
Hook
(8) Remove the two screws to detach the Plate Angle Adjustment and
the Plate Retainer.
Plate Angle
Adjustment
Adjustment
Plate
Retainer
Retainer
(9) Remove the Slider B Assy and the Bearing Balls while releasing the
hooks.
Note :
Pay attention to prevent the Bearing Balls from falling.
Slider B Assy
Bearing Balls
Bearing Ball
Hook
Hook
Assembly Procedure
The assembly procedure is the reverse of the removal procedure.
Apply grease to the portions indicated below.
Apply grease to the portions indicated below.
Note: After applying grease, attach the Ball Bearings.
G
G-15 and
G G-116
Slider B Assy
Slider B Assy
Slider B Assy
Bearing Balls
G
G
G-15
Bearing Balls
G
G
G-15
1-7. METHOD FOR REPLACING THE AS SLIDER B ASSY
Removal Procedure
Click on the first or last page to see other SLT-A99 / SLT-A99V service manuals if exist.