SAL70300G2 - Sony Digital Camera Service Manual (repair manual). Page 10

2-7

SAL70300G2 (4.5-5.6/70-300 G SSM II) (70-300mm F4.5-5.6 G SSM II)

Grease (G-116):  J-6082-628-A

1.  Apply the grease (G-116) to the indicated portions of middle lens barrel assy. (Five locations at inner side, one location at outer side)

 

Apply the grease (G-116)
(Three locations of bayonet)

Apply the grease (G-116)
(All circumference of
inner side)

Apply the grease (G-116)
(All circumference of
inner side)

Apply the grease (G-116)
(All circumference of
outer side)

Middle Lens Barrel Assy

2.  Apply the grease (G-116) to the indicated portions of 1st-F linkage barrel. (Two locations at inner side, three locations at outer side)

 

Apply the grease (G-116)
(Two locations of bayonet)

Apply the grease (G-116)
(Two locations at groove)

Apply the grease (G-116)
(All circumference of outer side)

1st-F linkage Barrel

Adhesive bond (B-10): 

J-6082-612-A

1.  Aligning the groove A of 1st-F linkage barrel with the stopper insertion hole of middle lens barrel assy, insert the 1st-F linkage barrel 

in the middle lens barrel assy as far as it goes.

2.  Rotating the 1st-F linkage barrel, engage the inner bayonet of middle lens barrel assy with the outer bayonet groove of 1st-F linkage 

barrel.

3.  Turn the 1st-F linkage barrel so that groove A is visible from the hole A of the middle lens barrel assy as shown in the figure.

 

Stopper Insertion Hole

Groove A

Inner bayonet

Groove of
outer bayonet

Middle Lens Barrel Assy

1st-F Linkage Barrel

 

Hole A

Groove A

 
4.  Set the unit to the TELE end.
5.  Set the 2nd-F linkage coma to the near end.
6.  Engaging two grooves (inner side) of 1st-F linkage barrel with the 2nd-F linkage coma, install the middle lens barrel assy and 1st-F 

linkage barrel.

 

Set the unit to
TELE end.

Middle Lens
Barrel Assy

1st-F Linkage Barrel

Groove (Inner side of
1st-F linkage barrel)

2nd-F Linkage Coma

2nd-F Linkage Coma

Set the unit to near end.