SAL70300G2 - Sony Digital Camera Service Manual (repair manual). Page 6

2-3

Note for assembling and grease applying positions are shown.

SAL70300G2 (4.5-5.6/70-300 G SSM II) (70-300mm F4.5-5.6 G SSM II)

1.  Aligning the red index mark of filter screw frame with the index mark (zoom) as shown in the figure, install the filter screw frame.
2.  Tighten three screws to fix the filter screw frame.

 

Filter Screw Frame

Red Index Mark

Red Index Mark

Index Mark (Zoom)

1.  Aligning the notches A and B of 1st lens assy as shown in the figure, install the 1st lens assy.
2.  Tighten three screws to fix the 1st lens assy.

 

Index Mark
(Zoom)

Notch A

Notch B

Notch B

Notch A

Notches B

1st Lens Assy

1st Lens Assy

Adhesive bond (B-10): 

J-6082-612-A

Grease (G-116):   

J-6082-628-A

1.  Apply the grease (G-116) to the indicated portion of main spring guide.
2.  Aligning the main spring guide with the positioning index bosses, install the main spring guide and fix it with two screws.

 

Positioning Index Bosses (Two locations)

Main Spring
Guide

Main Spring Guide

Apply the grease (G-116)
(Side and bottom)

3.  Install the main spring to the preset ring assy.
4.  Peel the adhesive tape off the function lever fixed tentatively.
5.  Aligning the screw holes with the installation holes of function lever, install the preset ring assy to the unit and fix it with three 

screws.

 

Screw Hole

Function
Lever

Adhesive Tape

Function Lever

Installation holes of
function lever

Screw Hole

Preset Ring Assy

Preset Ring Assy,
Main Spring

Main Spring