SAL70200G2 - Sony Digital Camera Service Manual (repair manual). Page 12

2-9

SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)

Universal wrench: J-6082-609-A
Chip A for universal wrench: J-6082-609-1
Chip B for universal wrench: J-6082-609-2
Grease (G-115): J-6082-627-A

1.  Apply the grease (G-115) continuously to the front of G1 holding rubber (G1 holder ring side).
2.  Tighten securely the G1 holder ring, using the universal wrench.

 Tighten further.

G1 Holder Ring

G1 Holder Ring

G1 Holder Rubber

Apply the grease 
(G-115)
(G1 holder ring side)

Adhesive bond (B-40): J-6082-614-A

1.  Align the groove of the 5 group ball frame block with the flexible card and install them as shown in the figure.
2.  Apply the adhesive bond (B-40) to the tips of eight screws.
3.  While turning clockwise the 5 group ball frame block to eliminate a play, fix it with eight screws.

Apply the adhesive 
bond (B-40)

Apply the adhesive 
bond (B-40)

Groove in 5 group ball 
frame block

5 Group Ball Frame Block

While turning clockwise 
the 5 group ball frame 
block to eliminate a play, 
install it with eight screws.

Mount

Screws

Screws

Flexible PWB

Apply the 
adhesive 
bond (B-40)