SAL70200G2 - Sony Digital Camera Service Manual (repair manual). Page 8

2-5

Note for assembling and grease applying positions are shown.

SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)

Grease (G-85): J-6082-626-A
Adhesive (Adhesive ivory white):
Note:

   Use the glue (adhesive ivory white) or the equivalent

1.  Affix the tripod mount friction sheet to the tripod mount as shown in the figure.

   Affix the tripod mount friction sheet, starting from the cut portion. Do not cover the cut portion with the tripod mount 

friction sheet.

Tripod Mount

Cut portion

Cut view

Cut view

Tripod Mount Friction Sheet

2.  Apply the grease (G-85) to the mating face of tripod mount knob and screw portion. Then, insert the tripod mount knob as far as it goes 

to the tripod mount.

3.  After tightening the screw to the extent that the tripod mount knob comes off, turn it back half turn (Loosen).
4.  Apply the adhesive (adhesive ivory white) to the indicated portion.

   It is not necessary to fill the screw hole with the adhesive. Apply the adhesive to the head of screw and hole.

Apply the Grease
(G-85)

Apply the adhesive bond
(Adhesive ivory white)

Tripod Mount Knob

Tripod Mount

Tripod 
Mount

Tripod Mount Knob

Screw

Screw

Mount the tripod washer block to the lens body, aligning the mount index with the red mark on the tripod mount.

Tripod Washer Block

Mount Index

Red mark on the Tripod Mount