Read Sony SAL70200G2 Service Manual online
2-7
SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)
HELP04
Adhesive bond (B-40): J-6082-614-A
Adhesive bond (LOCTITE 460)
Note:
Adhesive bond (LOCTITE 460)
Note:
Use the adhesive bond (LOCTITE 460) or the equivalent.
Do not use the instant glue which becomes white when dried.
1. Apply the adhesive bond (LOCTITE 460) to the indicated portion of outer barrel and affix the mount index on it.
Note:
Apply the surrounding of center of counter bore for the adhesive bond not to seep out.
2. Install the tripod base roller to the tripod mount screw, apply the adhesive bond (B-40) to the tip of screw and install them to the outer
barrel.
Outer barrel
Mount Index
Tripod Mount Screw
Tripod Mount Screw
Tripod
Mount
Screw
Mount
Screw
Tripod
Mount
Screw
Mount
Screw
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Tripod
Base
Roller
Base
Roller
Tripod
Base
Roller
Base
Roller
Apply the adhesive bond
(LOCTITE460)
(LOCTITE460)
3. Affix the rubber sheet, aligning with indicated line while pushing it without pulling.
4. Remove the inside of the rubber sheet.
4. Remove the inside of the rubber sheet.
Note:
If the rubber sheet is pulled, it stretches and deforms. Therefore, affix it, pushing it down.
5. Affix the zoom ring friction cloth to the indicated portion of outer barrel.
Note:
If the zoom ring friction cloth is pulled, it stretches and deforms. Therefore, affix it, pushing it down.
Outer Barrel
Rubber sheet
affixing location
affixing location
Affix the
rubber sheet.
rubber sheet.
Inside of
rubber sheet
rubber sheet
Peel off the inside
of rubber sheet.
of rubber sheet.
Zoom Ring Friction
Cloth affixing location
(lower ring)
Cloth affixing location
(lower ring)
Zoom Ring Friction Cloth
HELP05
1. Fold back the encoder DV encoder flexible PC board as shown in the figure.
Cut a polyester tape (black) 10mm in the specified size. Affix the polyester tape (black) 10mm to the DV encoder flexible PC board, fix
it.
it.
2. To prevent the connection flexible (B) block from swelling outside, cut the polyester tape (black) 10mm in the specified size and fix it
with the polyester tape.
Polyester Tape (Black)
10mm (10X50mm)
10mm (10X50mm)
Polyester Tape (Black)
10mm (10X50mm)
10mm (10X50mm)
Polyester Tape (Black)
10mm (10X50mm)
10mm (10X50mm)
CL-032 Board
Connection Flexible (B)
Block
Block
Connection Flexible (B)
Block
Block
CL-034 Board
DV Encoder Flexible
PC Board
PC Board
HELP06
Connect the CL-034 board and the CL-032 board with the connection flexible (B) block.
Note:
Note:
Align the triangle mark on the CL-032 board with the triangle mark on the connection flexible (B) block.
CL-032 Board
CL-032 Board
Connection Flexible
(B) Block
(B) Block
CL-034 Board
Connection Flexible (B) Block
Triangle mark
Click on the first or last page to see other SAL70200G2 service manuals if exist.