SAL300F28G2 - Sony Digital Camera Service Manual (repair manual). Page 9

2-6

SAL300F28G2 (2.8/300 G SSM 

Ⅱ) (300mm F2.8 G SSM Ⅱ)

5.  Install the tripod index of outer barrel to the aperture inner barrel, aligning with the filter insertion opening of aperture inner barrel.
6.  Apply two drops of adhesive bond (B-40) to the tips of six screws and tighten aperture inner barrel with six screws.

Aperture Inner Barrel

Filter Holder Insertion Hole

Tripod Index

Outer Barrel

Apply the bond
(B-40)

Apply the bond
(B-40)

7.  Insert the connector of SW connection FPC block in the connector of switch base plate block.
8.  Install the switch base plate block to the outer barrel. Apply two drops of adhesive bond (B-40) to the tips of four screws and tighten the 

switch base block with four screws.

Switch Base Block

SW Connection FPC Block

Apply the bond
(B-40)

Adhesive bond (B-40): J-6082-614-A

1.  Apply two drops of adhesive bond (B-40) to the tips of four screws and tighten the strap holder with two strap holder fixing screws.
2.  Apply two drops of adhesive bond (B-40) to the tips of four tripod mount screws and tighten four tripod base rollers with four tripod 

mount screws.

Tripod Mount Screw

Tripod Mount Screw

Tripod Mount Screw

Tripod Base Roller

Tripod Base Roller

Tripod Base Roller

Screw

Strap Holder

Tripod Mount Screw

Strap Holder

Apply the bond
(B-40)

Apply the bond
(B-40)

Apply the bond
(B-40)

3.  Affix the piezoelectric sounder (buzzer) to the bore of outer barrel with two sheets of buzzer setting tape.

 Affix two sheets of buzzer setting tape so that the buzzer hole of outer barrel can be seen.

 

Orient the harness of piezoelectric sounder (buzzer) in the direction of switch base block installation hole.

4.  Affix the rubber sheet C to the indicated portion of outer barrel.

Outer Barrel

Buzzer hole

Outer Barrel

Rubber Sheet C

Buzzer Setting Tape

Piezoelectric sounder
(Buzzer)

Switch base block
installation hole