Read Sony SAL300F28G2 Service Manual online
2-10
SAL300F28G2 (2.8/300 G SSM
Ⅱ) (300mm F2.8 G SSM Ⅱ)
HELP14
Connect the CL-034 board and the CL-032 board with the connection flexible (B) block.
Note:
Align the triangle mark of CL-032 board with the triangle mark of connection flexible (B) block.
CL-032 Board
CL-032 Board
CL-034 Board
Triangle mark
Connection Flexible (B) Block
Connection Flexible (B) Block
HELP15
Adhesive bond (B-40): A-6082-614-A
1. Cut the polyimide sheet in 12 x 32mm length and affix it to the CL-032 board.
2. Apply two drops of adhesive bond (B-40) to the tips of two screws.
3. Fix the CL-032 board with two screws.
4. Solder two harnesses (black/red) leading from the connection box block and three harnesses (blue/black/yellow) to the CL-032 board
2. Apply two drops of adhesive bond (B-40) to the tips of two screws.
3. Fix the CL-032 board with two screws.
4. Solder two harnesses (black/red) leading from the connection box block and three harnesses (blue/black/yellow) to the CL-032 board
(A side).
Harness (Red)
Harness (Black)
Harness (Black)
Harness (Blue)
Harness (Yellow)
(From the
connection
box block.)
connection
box block.)
(From the stator)
CL-032 Board
CL-032 Board
CL-032 Board
(Side A)
CL-032 Board
(Side B)
Apply the bond
(B-40)
(B-40)
32mm
12
mm
Polyester Tape
(12X32 mm)
(12X32 mm)
Polyester Tape
(12X32 mm)
(12X32 mm)
Click on the first or last page to see other SAL300F28G2 service manuals if exist.