SAL300F28G2 - Sony Digital Camera Service Manual (repair manual). Page 4

Read Sony SAL300F28G2 Service Manual online

2-1
SAL300F28G2 (2.8/300 G SSM Ⅱ) (300mm F2.8 G SSM Ⅱ)
2. DISASSEMBLY
NOTE FOR REPAIR
•  Make sure that the flat cable and flexible board are not cracked of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
•  When remove a connector, don t pull at wire of connector. It is possible that a wire is snapped.
•  When installing a connector, don t press down at wire of connector. 
It is possible that a wire is snapped.
•  Do not apply excessive load to the gilded flexible board.
Notches
Holes
How to Use
Attach the chip-A, chip-B or chip-C to the universal wrench.
For the notches:
For the holes:
UNIVERSAL WRENCH
In case of the following notches or holes are located in the lens block, etc. during disassembling/
assembling the lens, Use the universal wrench.
chip-A, chip-C
chip-B
Universal wrench
J-6082-609-A
Chip-A for 
universal wrench:
J-6082-609-1
Chip-B for 
universal wrench:
J-6082-609-2
Chip-C for
universal wrench:
J-6082-609-3
Notches
Holes
Chip
Chip-A
or
Chip-C
Chip-A
or
Chip-C
Chip-B
Chip-B
Chip
Match the universal wrench to the holes or notches of the lens block, etc.
Match the universal wrench
to the width of holes or notches.
Universal wrench
LOCTITE 460 or
the equivalent
LOCTITE 460 or
the equivalent
SERVICE TOOLS
G-15
Grease (G-80):
G-80
Grease (G-85):
G-85
Grease (G-15):
B-10
Bond (B-10)
A-20
Anti-diffusion (A-20):
J-6082-611-A
J-6082-612-A
J-6082-625-A
J-6082-626-A
J-6082-619-A
B-40
Bond (B-40)
J-6082-614-A
Grease (G-115):
G-115
J-6082-627-A
Grease (G-117):
G-117
J-6082-660-A
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
Page of 88
Display

Click on the first or last page to see other SAL300F28G2 service manuals if exist.