Read Sony SAL300F28G2 Service Manual online
2-5
HELP
Note for assembling and grease applying positions are shown.
SAL300F28G2 (2.8/300 G SSM Ⅱ) (300mm F2.8 G SSM Ⅱ)
HELP01
Grease (G-115): J-6082-627-A
Grease (G-85): J-6082-626-A
Grease (G-85): J-6082-626-A
1. Affix the tripod mount friction to the tripod mount as shown in the figure.
Note:
Affix the tripod mount friction, starting from the cut portion of tripod mount. Do not cover the cut portion with the tripod
mount friction.
2. Apply the grease (G-115) to all circumferences of indicated portion (sliding part on the tripod base roller) of tripod mount.
Tripod Mount
Cut portion
Cut
view
Tripod Mount Friction
Tripod Mount
Screw
Tripod Mount
Apply the grease (G-115)
to all circumferences of
sliding part on the tripod
base roller.
Tripod Base
Roller
Cut
view
Cut
view
3. Apply the grease (G-85) to the indicated screw portion of tripod mount screw knob.
4. Insert the tripod mount screw knob until the E ring groove is seen through the cut portion.
5. Insert the E ring to the E ring groove.
4. Insert the tripod mount screw knob until the E ring groove is seen through the cut portion.
5. Insert the E ring to the E ring groove.
E Ring
Cut portion
Tripod Mount Screw Knob
E ring groove
Apply the grease
(G-85)
HELP02
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40): J-6082-614-A
Grease (G-15): J-6082-619-A
Adhesive bond (B-40): J-6082-614-A
Grease (G-15): J-6082-619-A
1. Apply the anti-diffusion (A-20) to the indicated portion of outer barrel.
2. Apply the grease (G-15) to the indicated portions of outer barrel, MF ring thrust washer and focus ring.
3. Aligning the switch base plate installation window of outer barrel with the CL-034 board, install the outer barrel.
4. Solder two harnesses (red) (black) leading from the buzzer to the CL-034 board.
2. Apply the grease (G-15) to the indicated portions of outer barrel, MF ring thrust washer and focus ring.
3. Aligning the switch base plate installation window of outer barrel with the CL-034 board, install the outer barrel.
4. Solder two harnesses (red) (black) leading from the buzzer to the CL-034 board.
Outer Barrel
Outer Barrel
Outer Barrel
Focus Ring
Inside
MF Ring Thrust Washer
MF Ring Thrust Washer
Focus Ring
Outer Barrel
Switch Base Plate
installation window
CL-034 Board
CL-034 Board
Harness (Red)
(From buzzer)
Harness (Black)
(From buzzer)
Harness
(Red and Black)
from buzzer
Outside
Inside
Outside
Apply
the anti-diffusion
agent (A-20)
Cut
view
Cut
view
Apply the grease
(G-15)
Apply the grease
(G-15)
Click on the first or last page to see other SAL300F28G2 service manuals if exist.