Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
HELP26
Adhesive bond (B-40):
J-6082-614-A
1.
Apply two drops of adhesive bond (B-40) to the tips of two screws and tighten the focus scale ring with two screws.
2.
Affix the focus scale plate, aligning the position index line of focus scale plate with the marking-off of focus scale ring.
HELP27
Adhesive bond (B-40):
J-6082-614-A
Grease (G-115):
J-6082-627-A
1.
Apply the adhesive bond (B-40) to holes (screw holes) for installing the focus guide pin at three locations and install the washer,
differential bearing and focus guide pin.
2.
Apply the grease (G-115) to all of circumferences of indicated portion of MF connection ring A.
3.
Affix the rotor inner tape to the indicated portion of outer tube.
Apply the adhesive bond (B-40)
Focus Scale Ring
Focus Scale Plate
Focus Scale Plate
Focus Scale Ring
Position index
line (marking line)
line (marking line)
Apply the adhesive bond (B-40)
Apply the adhesive
bond (B-40)
to screw Hole
bond (B-40)
to screw Hole
Apply the grease
(G-115)
(G-115)
MF Connection
Ring A
Ring A
Focus Guide Pin
Differential Bearing
Washer
Rotor Inner Tape
Rotor Inner Tape
Lower end reference
of outer tube
(Affix starting any position.)
of outer tube
(Affix starting any position.)
Click on the first or last page to see other SAL300F28G service manuals if exist.