Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
HELP06
2gun tightening JIG (300F28G): J-6082-697-A
1.
Install 1st lens block and 2nd lens block.
Note:
Install the 2nd lens block using the 2gun tightening JIG (300F28G).
2.
Insert the rubber sheet A in the groove of front lens barrel. And then, install them to the mirror tube (B) block.
3.
Align the screw holes of front lens barrel A with the screw holes of mirror tube (B) block. Apply two drops of adhesive bond (B-40)
to the tips of six screws and tighten them with six screws.
Mirror Tube (B) Block
2nd Lens Block
2nd Lens Block
2gun tightening JIG
(300F28G)
(300F28G)
1st Lens Block
Front Lens Barrel A,
Filter,
Filter Holder,
Rubber Sheet A
Filter,
Filter Holder,
Rubber Sheet A
Front Lens Barrel A,
Filter,
Filter Holder
Filter,
Filter Holder
Groove
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the adhesive
bond (B-40)
bond (B-40)
Rubber Sheet A
Ver. 1.2 2008.05
The changed portions from
Ver. 1.1 are shown in blue.
Click on the first or last page to see other SAL300F28G service manuals if exist.