Read Sony SAL28F28 Service Manual online
HELP
SAL28F28 (2.8/28) (28mm F2.8)
HELP11
Adhesive bond (B-40):
J-6082-614-A
1.
Align the linear guide key installation block of outside barrel with the linear guide key groove of inner barrel (any 2 locations of 3
locations).
2.
Apply the bond (B-40) to the screwed portions of 4 screws shown in the figure and tighten the screws in order of 1 to 4.
Note:
Push the linear guide key to the inner side (in the arrow direction in the figure) and hold it lightly.
Tighten the screws while making the linear guide key and inner barrel in parallel, Rotate the inner helicoid barrel and confirm
that it rotates smoothly.
HELP12
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40):
J-6082-614-A
Grease (G-15):
J-6082-619-A
1.
Apply the grease (G-15) and the anti-diffusion agent (A-20) to the instruction portions of the inner tube.
Note:
Be careful not to get the anti-diffusion agent (A-20) smeared to the portion A.
3
4
1
2
Parallel
Parallel
Portion A
Apply the grease(G-15)
(sliding surface)
(sliding surface)
Apply the grease(G-15)
(sliding surface)
(sliding surface)
Apply the grease(G-15)
(sliding surface)
(sliding surface)
Apply the grease(G-15)
(All circumference)
(All circumference)
Apply the anti-diffusion agent(A-20)
(All circumference)
(All circumference)
Apply the anti-diffusion agent(A-20)
(All circumference)
(All circumference)
Apply the anti-diffusion agent(A-20)
(All circumference)
(All circumference)
Apply the adhesive
bond(B-40)
bond(B-40)
Straight Key
Click on the first or last page to see other SAL28F28 service manuals if exist.