Read Sony SAL28F28 Service Manual online
HELP
SAL28F28 (2.8/28) (28mm F2.8)
2.
Apply the grease (G-15) to the instruction portion of the middle helicoid.
3.
Apply the adhesive bond (B-40) to the stopper screw, and tighten it to the outer tube.
4.
Apply the grease (G-15) to the instruction portion of the outer tube.
5.
Assemble the outer tube, middle helicoid and inner tube, and check the operation of the helicoid (stiffness, smoothness, catching).
6.
Set the helicoid level as shown in the figure.
Note:
This level is in infinity position.
Apply the grease(G-15)
(All circumference of threads)
(All circumference of threads)
Apply the grease(G-15)
(All circumference of threads)
(All circumference of threads)
Middle Helicoid
Apply the grease(G-15)
(All circumference of threads)
(All circumference of threads)
Apply the adhesive bond(B-40)
Outer tube
Inner Tube
23.9
16.1
Outer Tube
Middle Helicoid
Click on the first or last page to see other SAL28F28 service manuals if exist.