Read Sony SAL28F28 Service Manual online
HELP
SAL28F28 (2.8/28) (28mm F2.8)
HELP07
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-85):
J-6082-626-A
1.
Apply the adhesive bond ((LOCTITE 460) to the stopper screw, and attach it to the lens mount reveting block.
2.
Apply the anti-diffusion agent (A-20) and grease (G-85) to the instruction portions of the lens mount reveting block.
3.
Turn counterclockwise the pin of
aperture operate plate unit
to close the
aperture
.
4.
Attach the lens mount riveting block, aligning the cut portion of preset ring lever with the pin of
aperture operate plate unit
and the
coupler hole with the coupler.
HELP08
Oil (O-20): J-6082-610-A
Apply small amount of oil (O-20) to the instruction portion of the main spring.
Apply the adhesive bond
(LOCTITE460)
(LOCTITE460)
Lens Mount Reveting Block
Apply the anti-diffusion agant
(A-20)(All circumference)
(A-20)(All circumference)
Apply the grease(G-85)(3 claws)
Aplly small amount(O-20)(On contact area)
Coupler Hole
Rear Light Shield Barrel Tube
Coupler
Pin of the aperture operate plate unit
Ver. 1.2 2007.10
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
Click on the first or last page to see other SAL28F28 service manuals if exist.