Read Sony SAL28F28 Service Manual online
HELP
SAL28F28 (2.8/28) (28mm F2.8)
HELP06
Adhesive bond (B-40): J-6082-614-A
1.
Hook the main spring to the hook of rear light shield barrel tube and the hook of preset ring holding plate.
2.
Attach the rear light shield barrel tube to the lens mount riveting block, apply the bond (B-40) to the screwed portions of three screws
shown in figure, and tighten screws.
3.
Attach the ground spring to the rear light shield barrel tube and fix the main flexible unit with two screws.
Note:
Be careful not to tighten screws too strongly.
Confirm that the preset ring holding plate moves smoothly.
Main Spring
Preset Ring
Holding Plate
Holding Plate
Lens Mount
Riveting Block
Riveting Block
Rear Light Shield Barrel Tube
Apply the adhesive bond(B-40)
Apply the adhesive bond(B-40)
Ground Spring
Main Flexible Unit
Click on the first or last page to see other SAL28F28 service manuals if exist.