SAL1650 - Sony Digital Camera Service Manual (repair manual). Page 6

2-3

Note for assembling and grease applying positions are shown.

SAL1650 (DT 16-50 / F2.8) (DT 16-50mm F2.8 SSM)

Bond (B-10) : J-6082-612-A

1.  Install the 1st group adjustment washer.
2.  Install the 1st group assy, aligning the round mark on the back side of 1st group assy with the index on the unit.
3.  Apply a half drop (a bit) of adhesive bond (B-10) to the lowermost step of screw portion of front barrel assy block at two locations and 

tighten the name ring.

Apply the bond (B-10)

Index mark

Index mark

Circle mark

Circle mark

Index mark

1st Group Retainer

1st Group Retainer

1st Group Assy

1st Group Adjustment Washer

1st Group Slip Assy

1st Group Slip Assy

Grease (G-85): J-6082-626-A

1.   Apply the grease (G-85) to the indicated portion of mount assy block. 

Mount Assy

Mount Assy (Cross section)

Outer side

Entrance side

Back side of claw (3 locations)
(Entrance side)

Entrance side

Entrance side

Inner side

Apply the grease (G-85)

Apply the grease
(G-85)

Grease (G-36): J-6082-667-A
Grease (NCPOP2B): 7-640-016-79

1.  Apply the grease (NCPOP2B) to the indicated portion (trace side) of encoder flexible. 
2.  Apply the grease (G-36) to the indicated portion.

Outer Barrel Assy

Encoder Flexible Board

Apply the grease (G-35)
(all circumferences)

Apply the grease (NCPOP2B)