Read Sony SAL1650 Service Manual online
2-6
SAL1650 (DT 16-50 / F2.8) (DT 16-50mm F2.8 SSM)
HELP10
Bond (B-40): J-6082-614-A
1. Install the 2nd group assy and 2nd group adjustment washer.
Note 1:
When installing the 2nd group assy, align the groove of cam tube assy with the projection of 2nd group assy.
2. Tighten 3 screws.
Note 1:
Apply 2 drops of adhesive bond (B-40) to the tips of screws.
2nd Group Assy
2nd Group Adjustment Washer
1st Group Slip Assy
Apply the bond
(B-40)
(B-40)
Groove of the Cam Tube Assy
Align the Groove of the Cam Tube Assy
with the projection of the 2nd Group Assy.
with the projection of the 2nd Group Assy.
2nd Group Assy
Eye-piece side
Projection of the 2nd Group Assy
HELP11
Bond (B-40): J-6082-614-A
Grease (G-48): J-6082-669-A
Grease (G-48): J-6082-669-A
1. Apply the grease (G-48) to the indicated portion of 1st group slip assy.
Apply the grease
(G-48)
(G-48)
Apply the grease
(G-48)
(G-48)
1st Group Slip Assy
2. Install the 2nd group-3rd group-4th group assy to the 1st group slip assy,
aligning the pin of cam tube assy with the index of 1st group
slip assy as shown in the figure.
3. Tighten 3 screws.
Note 1:
Apply 2 drops of adhesive bond (B-40) to the tips of screws.
1st Group Slip Assy
Index mark
2nd-3rd-4th Group Block
Pin of the Cam Tube Assy
Pin of the Cam Tube Assy
Apply the bond
(B-40)
(B-40)
Click on the first or last page to see other SAL1650 service manuals if exist.