Read Sony SAL1650 Service Manual online
2-7
SAL1650 (DT 16-50 / F2.8) (DT 16-50mm F2.8 SSM)
HELP12
Bond (B-40): J-6082-614-A
1. Install the 2nd group slip assy to the cam tube assy, aligning the U-shaped groove of cam tube assy with the U-shaped groove of 2nd
group slip assy as shown in the figure.
2. Apply 2 drops of adhesive bond (B-40) to the tips of screws and tighten 3 screws.
2nd Group Slip Assy
U-shaped grooves
U-shaped grooves
Apply the bond
(B-40)
(B-40)
Apply the bond
(B-40)
(B-40)
Apply the bond
(B-40)
(B-40)
Cam Tube Assy
HELP13
Bond (B-40): J-6082-614-A
1. Install the 3-4th group assy to the cam tube assy, aligning the U-shaped groove of cam tube assy with the U-shaped groove of 3-4th
group assy as shown in the figure.
2. Apply 2 drops of adhesive bond (B-40) to the tips of screws and tighten 6 screws.
U-shaped grooves
U-shaped grooves
Apply the bond
(B-40)
(B-40)
Apply the bond
(B-40)
(B-40)
Apply the bond
(B-40)
(B-40)
Cam Tube Assy
3rd-4th Group Block
HELP14
Bond (B-40): J-6082-614-A
1. Install the 3rd group assy to the 3rd group slip assy.
2. Tighten 3 screws, pushing the 3rd group assy in the arrow direction
2. Tighten 3 screws, pushing the 3rd group assy in the arrow direction
Note:
Apply 2 drops of adhesive bond (B-40) to the tips of screws.
3rd Group Slip Assy
3rd Group Assy
Apply the bond
(B-40)
(B-40)
HELP15
Bond (B-110): J-6082-617-A
1. Apply the adhesive bond (B-110) to the indicated portion of middle barrel assy and install the focus rubber.
Apply the bond
(B-40)
(B-40)
Focus Rubber
1st Group Slip Assy
Click on the first or last page to see other SAL1650 service manuals if exist.