Read Sharp LC-50LE761K (serv.man2) User Guide / Operation Manual online
English - 7 -
First Time Installation
When turned on for the first time, the language selection
screen is displayed. Select the desired language and press
OK.
On the next screen, set your preferences using the navigation
On the next screen, set your preferences using the navigation
buttons and when finished, press
OK to continue.
You can activate
Store Mode option at this point. This option
is intended only for store use. It is recommended to select
Home Mode for home use. If Store Mode is selected, a
confirmation screen will be displayed. Select
YES to proceed.
This option will be available in
Other Settings menu and can
be turned off/on later.
If
If
Home Mode is selected, Store Mode will not be available
after the
First Time Installation. Press OK button to continue.
Aerial Installation
If you select
Aerial option from the search type selection
screen, the television will search for digital terrestrial TV
broadcasts. After all the available stations are stored, the
Channel List will be displayed on the screen.
While the search continues a message will appear, asking
While the search continues a message will appear, asking
whether you want to sort channels according to the LCN(*).
Select
Yes and press OK to confirm.
(*) LCN is the Logical Channel Number system that organizes
available broadcasts in accordance with a recognizable
channel sequence (if available).
Press
Press
MENU button to quit channel list and watch TV.
Cable Installation
If you select
Cable option and press OK button on the remote
control a confirmation screen will be displayed. Select
YES
and press
OK to proceed. To cancel operation, select NO
and press
OK. You can select frequency ranges from this
screen. Enter the frequency range manually by using the
numeric buttons. When finished, press
OK button to start
automatic search.
Note: Searching duration will change depending on the
Note: Searching duration will change depending on the
selected search step.
Satellite Installation (depends on the model)
If you select
Satellite option from the search type selection
screen, you can set a satellite and watch satellite channels.
When you select Satellite installation,
Antenna Type menu
will be displayed. You can select
Antenna type as Direct,
Unicable or DiSEqC switch.
Direct: If you have a single receiver and a direct satellite dish,
Direct: If you have a single receiver and a direct satellite dish,
select this antenna type. After selecting
Direct, another menu
screen will be displayed. Select an available satellite and press
OK to scan for services.
Unicable: If you have multiple receivers and a unicable
Unicable: If you have multiple receivers and a unicable
system, select this antenna type. Press
OK to continue.
Configure settings by following instructions on the screen.
Press
OK to scan for services.
DiSEqC switch: If you have multiple satellite dishes and
a
DiSEqC switch, select this antenna type. After selecting
DiSEqC switch, another menu screen will be displayed. You
can set four
DiSEqC options (if available). Press GREEN
button to scan all satellites or press
YELLOW button to
scan only the highlighted satellite. To save and exit press
OK button.
Note: Do not turn off the TV while initializing first time
Note: Do not turn off the TV while initializing first time
installation.
(*) Some options may not be available depending on the
country selection.
Media Playback via USB Input
You can connect a 2.5” and 3.5” inch (hdd with external
power supply) external hard disk drives or USB memory
stick to your TV by using the USB inputs of the TV.
IMPORTANT! Back up your files before making any
connections to the TV. The Manufacturer will not be
responsible for any file damage or data loss.
Certain types of USB devices (e.g. MP3 Players) or USB
Certain types of USB devices (e.g. MP3 Players) or USB
hard disk drives/memory sticks may not be compatible
with this TV. The TV supports FAT32 and NTFS disk
formatting but
recording will not be available with NTFS
formatted disks.
While formatting a USB hard disk that has 1TB (Tera Byte)
While formatting a USB hard disk that has 1TB (Tera Byte)
or more file capacity, you can experience problems with the
formatting process.
Quickly plugging and unplugging USB devices, is a very
Quickly plugging and unplugging USB devices, is a very
hazardous operation. This may cause physical damage to
the USB player and the USB device itself. Do not pull out the
USB module while playing a file.
Media Browser Menu
You can play photo, music, and video files stored on a USB
storage device or on a media server. Connect a USB disk
to one of the USB inputs located on the side of the TV. Or
connect your media server to the same network with the TV.
Press the “media browser button -
connect your media server to the same network with the TV.
Press the “media browser button -
” on the remote or
press the
MENU button and select Media Browser tab by
using Left/Right buttons and press
OK. Main media browser
screen will be displayed.
Select the media type to be listed and press
Select the media type to be listed and press
OK.
If there is more than one media source available, a list of
devices and servers will be displayed. Highlight the device
or server from the list and press
OK.
If you press the
MENU button while in the Media Browser mode
you can access
Picture, Sound and Settings menu options.
Pressing the
MENU button again will exit from this screen.
You can set your Media Browser preferences by using the
settings menu.
Changing Image Size: Picture Formats
Programmes can be watched in different picture formats,
depending on the transmission received. You can change the
aspect ratio (image size) of the TV for viewing the picture in
different zoom modes. Press “
different zoom modes. Press “
” button repeatedly to
change the image size. You can shift the screen up or down
by using “
” or “
” buttons while in
14:9 Zoom, Cinema
or
Subtitle.
Using the Channel List
The TV sorts all stored stations in the channel list. You can
edit this channel list, set favourites or set active stations to be
listed by using the
Channel List menu options. Press MENU
button to view main menu. Select
Channel List item by using
Left or Right button. Press OK to view menu contents. Select
Edit Channel List to manage all stored channels. Use Up or
Down and OK buttons to select Edit Channel List. Press Up
or
Down button to select the channel that will be processed.
Press
Left or Right button to select a function. Use P+/P-
buttons to move page up or down. Press
MENU button to exit.
Click on the first or last page to see other LC-50LE761K (serv.man2) service manuals if exist.